Bondex Premium Wood Stain - Silver Grey - Water Based & Hardwearing - 12 Years
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Bondex Premium Wood Stain in Silver Grey is designed for homeowners seeking durable and weather-resistant protection for both indoor and outdoor wood surfaces. Its key benefit is offering up to 12 years of protection with UV and weather resistance. A potential caveat is its availability in only three colours.
All features
| Colour | Grey |
|---|---|
| Model Part Number | 447006 |
| Brand | Bondex |
Extended Product Information
FAQs
What surfaces can Bondex Premium Wood Stain be used on?
It can be used on indoor and outdoor wood surfaces, as well as galvanized steel, primed steel, and uPVC.
How long does the protection last?
Bondex Premium offers up to 12 years of protection.
What is the recoat time for this stain?
You can apply a second coat after just 12 hours.
Is this stain suitable for children's toys?
Yes, Bondex Premium Wood Stain is safe to use on children's toys.
What is the coverage rate?
The coverage is approximately 10 m² per litre.
How do I clean my brushes after use?
Clean application tools immediately after use with water.
Can I use this stain on existing painted surfaces?
It is recommended for bare wood or surfaces that have been properly prepared and primed (for metal and uPVC). Existing paint should be sound or removed.
Troubleshooting
Uneven finish or brush marks visible.
Ensure the stain is stirred thoroughly before and during application. Apply in thin, even coats, working in one direction. Avoid over-brushing.
Stain is not drying within 12 hours.
Check environmental conditions; low temperatures or high humidity can slow drying times. Ensure the surface was clean and dry before application. Apply in a well-ventilated area.
Poor adhesion on metal or uPVC.
Ensure the surface was adequately prepared and primed before applying the wood stain. Re-prime if necessary and reapply the stain.
Colour appears different from the can.
The final colour can be influenced by the underlying wood tone and the number of coats applied. Test on an inconspicuous area first. Stir thoroughly to ensure pigment is evenly dispersed.
Pros and Cons
Pros
- Provides up to 12 years of protection.
- Excellent weather and UV resistance.
- Fast recoat time of 12 hours.
- Suitable for multiple surfaces beyond wood.
- Water-based formula for easier cleanup.
- Safe for use on children's toys.
Cons
- Limited colour selection (available in three colours).
- Opaque finish conceals wood grain.
- Requires a primed surface for steel and uPVC application.
Setup, Compatibility & Care
Preparation: Ensure surfaces are clean, dry, and free from dirt, dust, and grease before application. For bare wood, ensure it is sound. For galvanised steel, primed steel, and uPVC, a primer is required for optimal adhesion.
Application: Stir the stain thoroughly before use. Apply evenly with a brush, roller, or sprayer. For best results, apply two coats. Allow 12 hours between coats, depending on conditions.
Compatibility: This water-based stain is suitable for interior and exterior wood. It can also be applied to properly primed galvanised steel, primed steel, and uPVC.
Care: Clean application tools immediately after use with water. For the stained surface, clean with a damp cloth and mild detergent as needed. Avoid abrasive cleaners.