Bondex Premium Wood Stain - Black - 2.5L
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Bondex Premium Wood Stain in Night Black is an opaque, water-based wood stain ideal for both indoor and outdoor use. Its primary benefit is providing tough, long-lasting protection with up to 12 years of durability. A potential caveat is its specific application requirements for optimal performance. This product offers weather and UV resistance, a quick 12-hour recoat time, and covers approximately 10 m²/l, making it suitable for a variety of surfaces including fences, garden furniture, window frames, galvanized steel, primed steel, and UPVC. It is also certified safe for use on children's toys, reflecting over 120 years of Scandinavian quality in woodcare.
All features
| Colour | Black |
|---|---|
| Model Part Number | 447007 |
| Brand | Bondex |
Extended Product Information
FAQs
How long does Bondex Premium take to dry?
The recoat time for Bondex Premium is 12 hours. Drying times can vary depending on temperature, humidity, and film thickness.
Can Bondex Premium be used on existing paint or varnish?
It is generally recommended for bare surfaces or prepared previously coated surfaces. Lightly sanding and cleaning existing paint or varnish may be necessary. Always test on a small area first.
What surfaces is Bondex Premium suitable for?
It is suitable for indoor and outdoor wood surfaces, fences, garden furniture, window frames, galvanized steel, primed steel, and UPVC.
How do I clean up tools after using Bondex Premium?
Clean application tools immediately after use with water.
How many coats of Bondex Premium should I apply?
For best results and full opacity, two coats are generally recommended. Ensure you wait for the recoat time (12 hours) between coats.
What is the coverage rate of Bondex Premium?
Bondex Premium offers a coverage rate of approximately 10 m² per liter.
Is this product suitable for children's play equipment?
Yes, Bondex Premium is safe to use on children's toys and play equipment.
Troubleshooting
Uneven finish or streaking
Ensure the stain is applied evenly and without overworking it. Stir the product thoroughly before and during application. Check that the surface was properly prepared and is not porous or overly absorbent.
Stain not adhering properly
Verify that the surface was clean, dry, and free from contaminants before application. For difficult surfaces like bare wood or metal, ensure the correct primer was used. Ensure application conditions (temperature, humidity) were within the recommended range.
Color appears lighter or darker than expected
The final color can be influenced by the substrate's original color and porosity. Test the stain on a small, hidden area first. Two coats are recommended for full opacity, especially on darker or more porous surfaces.
Product is too thick to apply
Stir the product thoroughly. If extreme cold has affected viscosity, allow it to return to room temperature. Avoid adding thinners unless explicitly recommended by the manufacturer for specific conditions.
Pros and Cons
Pros
- Long-lasting protection (up to 12 years)
- Quick drying and recoating time
- Suitable for a wide variety of substrates
- Water-based for easier cleanup
- Safe for use on children's toys
Cons
- Requires proper surface preparation for best results
- Opaque finish may not be suitable for those preferring natural wood grain visibility
- Specific application conditions may be needed for optimal performance
Setup, Compatibility & Care
Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and loose material. For bare wood, it is recommended to apply a suitable primer. For previously coated surfaces, lightly sand and clean. For optimal adhesion on galvanised steel, primed steel, and UPVC, ensure the surfaces are clean and dry. Always test on an inconspicuous area first.
Application: Apply with a brush, roller, or spray. Work in the direction of the wood grain for wood surfaces. Ensure even application. Avoid applying in direct sunlight, during damp conditions, or when temperatures are below 5°C or above 30°C.
Compatibility: Bondex Premium is designed for wood, galvanised steel, primed steel, and UPVC. It is not recommended for use on plastics other than UPVC or on previously varnished or waxed surfaces without proper preparation.
Care: Clean application tools immediately after use with water. For maintaining the finish, wipe surfaces with a damp cloth as needed. Avoid abrasive cleaners.