Padded Shower Stool with Arms and Back - Green

Please refer to the product specifications for the exact weight capacity. It is important not to exceed this limit for safety reasons.

Locate the adjustment buttons or pins on each leg. Press the buttons or remove the pins and adjust the leg to the desired height. Ensure the pins click back into place or the buttons lock the legs securely.

The stool is typically made from a combination of aluminum or steel for the frame, a padded seat made of waterproof materials, and rubber suction feet.

Yes, the stool is suitable for use in walk-in showers, as long as there is enough space to accommodate it. Make sure the shower floor is smooth and suitable for the suction feet.

Clean the stool after each use or as needed. Rinse it with water and wipe it down with a mild cleaner to prevent the buildup of soap scum and mildew.

Please refer to the product documentation or contact the manufacturer for specific warranty information.

Yes, replacement parts, such as suction feet, may be available. Contact the manufacturer or retailer for assistance.

Ensure all legs are properly attached and the height adjustment mechanisms are locked. Check that the suction feet are firmly adhered to the shower floor. If the floor is uneven, try a different location or consider using a non-slip mat.

Clean the shower floor and the suction feet with soap and water to remove any residue. Ensure the floor surface is smooth and non-porous. Wet the suction feet slightly before placing them on the floor to improve adhesion.

Make sure the adjustment pins are fully engaged in the holes. Apply some lubricant to the adjustment mechanism if needed, but be careful not to get any lubricant on the floor to prevent slips.