Osmo Natural Oil Wood Stain - Red - 750ml - Liberon - 728C
Best current price£7.53from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£7.53Visit shop B&Q - Natural Oil Wood Stain 728 Red Cedar5Ml
Visit shopB&Q£7.53Visit shop All Offers
7 offers from £7.53 - £92.22
View price history by clicking the chart icon.
B&Q - Natural Oil Wood Stain 728 Red Cedar125MlFree delivery in 1–3 days£17.48Visit shop →
B&Q - Natural Oil Wood Stain 728 Red Cedar750MlFree delivery in 1–3 days£30.50Visit shop →
B&Q - Natural Oil Woodstain (Satin) 728 Cedar 750MlFree delivery in 1–3 days£30.50Visit shop →
B&Q - Natural Oil Wood Stain 728 Red Cedar2.5LFree delivery in 1–3 days£92.22Visit shop →
B&Q - Natural Oil Woodstain (Matt) 728 Cedar 2.5LFree delivery in 1–3 days£92.22Visit shop →
B&Q - Natural Oil Woodstain (Satin) 728 Cedar 2.5LFree delivery in 1–3 days£92.22Visit shop →
Product Information
Full details
The Osmo Natural Oil Wood Stain is a high-quality, water-based wood finish designed for both interior and exterior use, ideal for homeowners and DIY enthusiasts seeking to enhance and protect various wood surfaces. Its key benefit is providing deep, nourishing protection with a durable, long-lasting finish that resists water, UV rays, and abrasion, while enhancing the wood's natural beauty. A potential caveat is its availability in specific natural wood tones, which might limit design choices for some users.
All features
| Colour | Red |
|---|---|
| Brand | Osmo |
Extended Product Information
FAQs
Can I use Osmo Natural Oil Wood Stain on previously varnished wood?
Yes, but the old varnish must be completely removed or thoroughly sanded down to bare wood for the stain to penetrate effectively. Ensure the surface is clean and dust-free before application.
How many coats of Osmo Natural Oil Wood Stain should I apply?
Typically, one or two thin coats are sufficient. For heavily used surfaces or very porous woods, a third thin coat might be beneficial. Always allow adequate drying time between coats.
Is this product safe for food contact surfaces?
While the product is environmentally friendly and low in VOCs, it is not specifically certified for direct food contact. It is recommended for general wood finishing, not for cutting boards or surfaces that will come into direct contact with food.
How long does a tin of Osmo Natural Oil Wood Stain last?
The coverage depends on the type of wood and application method. On average, 1 liter covers approximately 12-16 square meters with one coat. Refer to the product label for specific coverage rates.
Can I mix different colors of Osmo Natural Oil Wood Stain?
Yes, Osmo Natural Oil Wood Stain colors can be mixed to create custom shades. Ensure they are mixed thoroughly before application.
Does the 'Red' color family represent a specific shade?
The 'Red' color family, as in the specific product 'Red Cedar', refers to a warm, reddish-brown tone that enhances the natural warmth of wood. The product is available in various natural wood tones.
What is the shelf life of Osmo Natural Oil Wood Stain?
When stored correctly in an unopened container in a cool, dry place, the product typically has a shelf life of at least 5 years. Once opened, it is best used within 1-2 years.
Troubleshooting
Uneven color or patchy application
Ensure the product was stirred thoroughly and applied evenly and thinly. Wipe off excess product immediately after application. For existing patches, light sanding and reapplication may be necessary.
Wood remains sticky or tacky after drying
This usually indicates too much product was applied or excess was not wiped off properly. Apply a very thin coat of mineral spirits to dissolve the sticky layer, wipe off thoroughly, and allow to dry completely. Consider a light sanding.
Finish is not as protective as expected
Verify that the surface was properly prepared and that sufficient coats were applied according to the product's recommendations. Ensure the product was stored correctly and not expired.
Product shows signs of mold or mildew on exterior surfaces
Clean the affected area thoroughly with a wood cleaner and allow it to dry. Reapply the Osmo Natural Oil Wood Stain, ensuring complete coverage and proper drying. The stain itself has protective properties against mold and mildew, but existing conditions need addressing.
Pros and Cons
Pros
- Deeply nourishes and protects wood from within.
- Suitable for a wide range of interior and exterior wood applications.
- Provides robust resistance against weathering, UV damage, and wear.
- Fast-drying formula speeds up project timelines.
- Eco-friendly with low VOCs and no harsh chemicals.
- Enhances the natural look of wood grain.
Cons
- Limited color palette primarily focused on natural wood tones.
- Requires proper surface preparation for optimal results.
- May not be suitable for highly glossy finishes.
- Application consistency is important to avoid uneven coloration.
Setup, Compatibility & Care
Setup: Ensure the wood surface is clean, dry, and free from dust, grease, and old finishes. Lightly sand the surface if necessary. Stir the product thoroughly before application.
Application: Apply thinly and evenly with a brush or roller, following the direction of the wood grain. Remove any excess product. Allow drying time between coats as per manufacturer instructions. Typically, one or two thin coats are sufficient.
Compatibility: Suitable for all types of wood, including hardwoods and softwoods. It can be used on flooring, furniture, cabinetry, doors, windows, fences, pergolas, and other interior and exterior wood surfaces.
Care: Clean spills immediately with a damp cloth. For routine cleaning, use a mild soap solution and a soft brush. Avoid harsh chemical cleaners. Reapplication may be needed every few years depending on exposure and wear.