Marl Coatings Polyurethane Floor Paint - 5L - Black

The floor must be clean, dry, and free of all contaminants like oil, grease, and dust. For bare concrete, consider etching or lightly abrading the surface. If the concrete is very porous or previously coated, a primer is highly recommended for best adhesion and durability.

Drying times vary based on temperature and humidity. Typically, it can be ready for light foot traffic in 24-48 hours. Full cure, meaning it can withstand heavy traffic and vehicles, usually takes 3-7 days. Always refer to the product's specific instructions.

Yes, this paint offers superior adhesion to previously painted floors, provided the existing paint is sound and well-adhered. Ensure the old surface is clean and lightly abraded for optimal bonding.

Yes, it is suitable for outdoor concrete and stone patios. Its durable formulation provides protection against foot traffic and environmental factors.

The semi-gloss finish is easy to clean. Use a soft brush or mop with mild detergent and water. Avoid using abrasive cleaners or harsh chemicals that could damage the coating.

Due to its oil-based and solvent formulation, good ventilation is essential. Wearing a respirator suitable for organic vapors is highly recommended, especially in confined spaces or if you are sensitive to fumes.

Generally, it is not recommended to apply directly over a sealant, as adhesion can be compromised. The floor should be clean, bare concrete or a properly prepared previously painted surface. If a sealant is present, it must be completely removed or the concrete etched/abraded to ensure proper bonding.

Ensure the surface was properly cleaned, degreased, and potentially etched or abraded. Check that a compatible primer was used if recommended. Ensure the surface was completely dry before application.

Apply paint in thin, even coats. Avoid over-application. Ensure consistent brushing/rolling technique. Stir paint frequently during application. Ensure adequate ventilation to aid flow and leveling.

Ensure adequate ventilation and maintain a consistent temperature. Avoid applying in damp or humid conditions. Thicker coats can increase drying time; apply thinner coats if possible.

This can be caused by excessive heat or applying to a damp surface. Ensure good ventilation and apply when temperatures are moderate. Check for moisture escaping from the concrete.