marlcoatings 5L Polyurethane Floor Paint - Brown - 5L01
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This heavy-duty, oil-based floor paint from Marlcoatings is designed for professionals and DIY users seeking a durable, protective finish for concrete, garage, workshop, and industrial floors. Its key benefit is superior adhesion and resistance to high traffic and automotive use, providing a semi-gloss, easy-to-clean surface. A potential caveat is that it is an oil-based formulation, requiring appropriate ventilation and solvent-based cleanup.
All features
| Colour | Brown |
|---|---|
| Model Part Number | 5l01 |
| Brand | marlcoatings |
Extended Product Information
FAQs
Is this paint suitable for outdoor patios?
Yes, this heavy-duty floor paint is suitable for outdoor surfaces like patios, provided the surface is properly prepared and dry before application.
How do I clean my tools after using this paint?
Tools used with this oil-based paint should be cleaned immediately after use with a suitable solvent or mineral spirits. Dried paint can be difficult to remove.
What is the drying time before I can walk on the floor?
You can typically walk on the floor after 16-24 hours, but full curing for heavy traffic and vehicle use takes approximately 5-7 days. Always refer to the specific product instructions for precise times.
Can I apply this paint over existing gloss paint?
Yes, you can apply it over previously painted floors, but it is recommended to lightly sand the existing gloss paint to create a key for the new coat to adhere to.
Does the brown colour have a specific finish?
Yes, this Marlcoatings Polyurethane Floor Paint in brown provides a semi-gloss finish.
What is the coverage rate of a 5L can?
Coverage varies depending on the surface porosity and application thickness. A general guideline for two coats on a smooth surface is typically around 5-10 square meters per liter. Please check the product packaging for the most accurate coverage information.
Is this paint safe for use in a food preparation area?
This is a heavy-duty industrial paint and may not be suitable for areas with direct food contact. Always check the product's safety data sheet (SDS) and ensure adequate curing and ventilation if used in proximity to food areas.
Troubleshooting
Paint is not adhering well to the surface.
Ensure the surface was properly prepared, clean, dry, and free from contaminants. Lightly abrading previously painted surfaces can improve adhesion. Use a suitable primer if necessary.
Uneven or streaky finish after application.
This can be due to inconsistent application. Ensure even spreading with the roller or brush. Avoid overworking the paint in one area. Check for and remove any drips immediately.
Slow drying times.
Drying times are dependent on temperature, humidity, and airflow. Ensure adequate ventilation. Avoid applying in very cold or humid conditions. Check the product data for recommended application temperature ranges.
Paint is too thick to apply smoothly.
While designed for good flow, very cold temperatures can thicken the paint. If necessary and recommended by the manufacturer, a small amount of appropriate solvent may be used for thinning, but do not over-thin.
Pros and Cons
Pros
- Provides a tough, long-lasting protective coating for floors.
- Excellent adhesion to various concrete and masonry surfaces.
- Resistant to heavy foot traffic and vehicle use.
- Easy to clean semi-gloss finish.
- Suitable for both DIY and professional application.
Cons
- Oil-based formula requires good ventilation during application and drying.
- Cleanup requires solvent-based thinners, not water.
- Longer drying times compared to water-based alternatives.
- May not be suitable for extremely flexible or plastic surfaces.
Setup, Compatibility & Care
Setup & Application:
- Surface Preparation: The surface must be clean, dry, and free from dust, grease, oil, and any loose material. For best results on bare concrete, ensure it is etched or profiled. Previously painted surfaces should be lightly sanded.
- Application Tools: Use a good quality synthetic brush or a solvent-resistant roller. Apply evenly, avoiding over-application.
- Ventilation: Ensure good ventilation during application and drying, as this is an oil-based product.
- Coats: Typically, two coats are recommended for optimal durability and finish. Allow adequate drying time between coats (refer to product packaging for specific times).
Compatibility:
- Suitable for concrete, cement screed, stone, and previously painted floors.
- Ideal for garages, workshops, basements, patios, factories, and warehouses.
- Not recommended for use on surfaces that are subject to significant flexing or expansion, or for use directly on plastics.
Care & Maintenance:
- Cleaning: Clean spills immediately with a suitable solvent. For regular cleaning, use a damp cloth or a mild detergent solution. Avoid abrasive cleaners that could damage the semi-gloss finish.
- Durability: The semi-gloss finish is designed to be hard-wearing and easy to maintain. Regular cleaning will preserve the finish and extend the life of the coating.