SKU: HV4 2 Gang Colour: Victorian Brass Plate Style: Classic Back Box Depth: 25mm
Currently unavailable
This product is not available at the moment. Check back later.
This Varilight HV4 dimmer switch is designed for homeowners and electricians seeking to control lighting levels in multiple rooms with a classic aesthetic. Its key benefit is the ability to smoothly adjust brightness for two separate circuits, offering ambiance control and energy saving. A potential caveat is the 25mm back box depth, which may require careful installation in certain wall types. The HV4 provides versatile dimming for incandescent and halogen loads up to 250W per gang, featuring a push-on/off rotary control and a stylish Victorian Brass finish.
| Colour | Gold |
|---|---|
| Model Part Number | HV4 |
| Brand | Varilight |
This dimmer is suitable for dimmable LED, halogen, and incandescent bulbs, provided the total wattage per circuit is between 40W and 250W.
A minimum back box depth of 25mm is required for installation.
No, using non-dimmable bulbs with any dimmer switch will likely cause damage to the bulb and/or the dimmer and is not recommended.
Clean the Victorian Brass finish with a soft, dry cloth. Avoid using any liquids or abrasive cleaning agents.
'2-Gang' means the switch plate has controls for two separate lighting circuits.
'2-Way' switching allows you to control a light or lighting circuit from two different locations, such as at the top and bottom of a staircase.
This is a standard rotary dimmer and does not have built-in smart home capabilities.
Verify that the power supply is on and that all connections are secure and correctly wired according to the 2-way or single-way configuration. Ensure the bulb wattage is within the specified range (40W-250W).
This can indicate incompatible bulbs or overloading. Ensure you are using dimmable bulbs and that the total wattage per gang is within the 40W-250W limits. Try a different brand of dimmable bulb.
Some warmth is normal during operation, especially under full load. If the dimmer becomes excessively hot, check for overloading or faulty wiring. Ensure adequate ventilation around the unit.
Double-check the wiring for the 2-way switching configuration. Ensure both switches are correctly wired as intermediate or two-way switches according to the diagram.
Setup:
Compatibility:
Care:
