Best current price£34.95from eBay
Shopping.co.uk recommended and popular offers
eBay£34.95Visit shop Varilight JVP252 Victorian Polished Brass 2 Gang 2 Way LED Dimmer 0-120W V-Pro
Visit shop
B&Q£38.50Visit shop B&Q - Double V-Pro Rotary 2-Way Led Dimmer 2 X 0-120WClassic Victorian Brass With Polished Brass KnobJvp252
Visit shop4 offers from £34.95 - £42.54
View price history by clicking the chart icon.
This Varilight V-Pro dimmer switch is designed for homeowners and electricians seeking smooth, buzz-free dimming for LED, halogen, and incandescent lighting. Its key benefit is advanced LED compatibility with adjustable settings, minimizing flicker and hum. A caveat is that it requires good quality dimmable LED lamps for optimal performance, and incompatible lamps cannot be returned as a product fault. It features 2-gang control, trailing edge technology, push-on/push-off operation with rotary dimming, and built-in overload and heat protection.
| Colour | Bronze |
|---|---|
| Model Part Number | JVP252 |
| Brand | Varilight |
Each dimmer on the Varilight V-Pro JVP252 has a dimmable LED load of 10W to 120W. Always refer to the official Varilight datasheets for precise ratings and limitations.
No, this dimmer is specifically designed for dimmable LED bulbs. Using non-dimmable LEDs will result in poor performance or failure.
These adjustments are made using specific push sequences on the dimmer control. Please consult the Varilight V-Pro instruction leaflet or datasheet for detailed instructions on how to perform these settings.
Trailing edge dimming (used by this V-Pro dimmer) is generally better suited for modern LED and electronic transformer loads, offering smoother dimming and less noise. Leading edge is more traditional and often used for wire-wound transformers.
Yes, this dimmer switch is designed for 1-way or 2-way switching configurations. Ensure correct wiring is followed for 2-way setups.
The dimmer is equipped with a self-resetting overload protection system. It will cut out to prevent damage if the wattage is grossly overloaded, and will reset once the load is reduced.
No, if the dimmer is purchased and the LED lamps are found to be incompatible, the dimmer itself is not considered faulty. In such cases, a better quality, compatible dimmable LED lamp should be fitted instead, and the dimmer cannot be returned.
Check the power supply at the mains and ensure all wiring connections are secure. Verify that the circuit is not overloaded.
Ensure you are using good quality dimmable LED lamps. Try adjusting the minimum brightness setting or changing the driving mode. Refer to the Varilight datasheets for compatible LED types.
This may indicate the circuit is overloaded. Check the total wattage of the connected lights against the dimmer's maximum rating. The self-resetting overload protection might be engaging. Reduce the load if necessary.
The integrated heat sensor may be activated. Ensure the total wattage does not exceed the maximum rating. Check for adequate ventilation around the dimmer. If overheating persists after reducing the load, the unit may require inspection.
This is often due to incompatible LED lamps. Try different brands or types of dimmable LEDs. Adjusting the dimming mode or minimum brightness may also help.
Setup:
Compatibility:
Care:
