Best current price£149.95from B&Q
Shopping.co.uk recommended and popular offers
B&Q£149.95Visit shop B&Q - All-In-One Paint & PrimerMulti-Surface Interior & ExteriorWalls & WoodPure Terracotta20LMatt
Visit shop2 offers from £149.95
View price history by clicking the chart icon.
The Pureworld All-in-One Paint is designed for DIY enthusiasts and homeowners seeking a simplified painting process. Its key benefit is its 'paint and primer in one' formulation, reducing project time and the need for multiple products. A potential caveat is the need for thorough surface preparation, especially on challenging materials. This professional-quality, water-based emulsion paint offers a durable, flawless finish on a wide range of interior and exterior surfaces, acting as a single solution for walls, ceilings, wood, masonry, and even concrete.
| Colour | Brown |
|---|---|
| Model Part Number | 5056291355997 |
| Brand | Pureworld |
No, the Pureworld All-in-One Paint is formulated as a paint and primer in one, eliminating the need for a separate primer on most surfaces.
This paint is suitable for general interior and exterior use. For high-heat surfaces like radiators, a specialized heat-resistant paint is recommended to ensure durability and prevent discolouration.
Drying times can vary based on temperature and humidity. Typically, it is touch-dry within 1-2 hours and ready for a recoat after 2-4 hours. Please refer to the specific product can for exact drying times.
Yes, this is a water-based emulsion paint with low odour and is suitable for most interior applications, including children's rooms, provided the surface is properly prepared and the paint is fully cured.
Yes, on most metal surfaces, provided they are clean, dry, and free from rust. For best adhesion and rust prevention on bare metal, apply a suitable metal primer first before using the All-in-One Paint.
Clean all brushes, rollers, and equipment immediately after use with warm soapy water. Rinse thoroughly.
Yes, you can paint over existing gloss paint, but it is crucial to lightly sand the gloss surface first to create a 'key' for the new paint to adhere to. Ensure the surface is clean and dry before application.
Ensure the surface was properly cleaned and prepared. Glossy or non-porous surfaces may need sanding. Check for residual moisture or contamination.
Apply paint in thin, even coats, maintaining a wet edge. Use a good quality brush or roller and avoid overworking the paint. Ensure consistent pressure.
While designed for good coverage, some dark colours over very light bases, or significant colour changes, may require a second coat. Ensure the first coat was applied evenly.
Ensure adequate ventilation in the room. While the paint has mould-resistant properties, extreme conditions may still require additional measures like improved airflow or dehumidifiers.
Preparation is Key: Ensure all surfaces are clean, dry, and free from dust, grease, and flaking paint. Lightly sand glossy or non-porous surfaces to improve adhesion. For previously painted surfaces, ensure they are sound. For new or bare porous surfaces (like untreated wood or plaster), a mist coat of thinned paint may be beneficial.
Application: Stir the paint thoroughly before use. Apply using a brush, roller, or spray gun. For best results, apply in thin, even coats. Allow adequate drying time between coats as per the product's specific instructions (typically 2-4 hours for recoating).
Compatibility: This paint is designed for a wide range of surfaces including plaster, drywall, wood, metal (primed), masonry, concrete, and previously painted surfaces. It is not recommended for use on floors or surfaces subject to heavy abrasion unless specifically tested.
Care: Clean application tools immediately after use with water. For cleaning painted surfaces, use a soft, damp cloth and mild detergent. Avoid abrasive cleaners, which can damage the finish.
