Best current price£17.95from B&Q
Shopping.co.uk recommended and popular offers
B&Q£17.95Visit shop B&Q - All-In-One Paint & PrimerMulti-Surface Interior & ExteriorWalls & WoodPure Terracotta0.5LMatt
Visit shop4 offers from £17.95 - £24.95
View price history by clicking the chart icon.
This Pureworld All-In-One Paint & Primer is designed for homeowners and DIY enthusiasts looking for a single, high-quality paint solution for any interior or exterior project. Its key benefit is simplifying the painting process by combining paint and primer, saving time and effort. A potential caveat is the specific colour ('Pure Terracotta') and finish ('Matt') available in this variant; other options may exist.
| Colour | Red |
|---|---|
| Model Part Number | 5056291352460 |
| Brand | Pureworld |
This paint is not specifically designed for high-heat surfaces like radiators. For best results, use a paint formulated for radiators.
Typically, one coat may be sufficient on previously painted surfaces in good condition. However, for new surfaces, unprimed materials, or when changing to a significantly different colour, two coats are recommended for optimal coverage and durability.
Drying times can vary based on temperature and humidity. Generally, allow at least 2-4 hours between coats. Refer to the product packaging for specific guidelines.
Yes, this paint is suitable for exterior wood surfaces, including furniture, sheds, and fences, offering weather protection.
Clean all tools with water immediately after use. Dried paint may be difficult to remove.
This specific product variant is 'Pure Terracotta'. For other colours, Pureworld offers this All-in-One Paint & Primer in a range of designer colours and finishes.
Ensure the surface was properly prepared (clean, dry, and free from contaminants). Lightly sand glossy surfaces before application. Check that the temperature is within the recommended range.
Stir the paint thoroughly. Apply thin, even coats. Use a high-quality brush or roller suitable for water-based paints. Avoid overworking the paint.
Ensure adequate ventilation. Avoid applying in very humid or cold conditions. Check the product for specific drying time recommendations.
While the paint has mould-resistant properties, ensure the source of moisture is addressed. Improve ventilation in the area and address any leaks or condensation issues.
Preparation:
Ensure the surface is clean, dry, and free from dust, grease, and flaking paint. For best results on glossy or non-porous surfaces, lightly abrade with sandpaper and wipe clean.
Application:
Stir the paint thoroughly before use. Apply evenly with a brush, roller, or spray gun. For optimal results, apply in a well-ventilated area between 10°C and 25°C. Two coats may be required for deep colours or contrasting surfaces.
Compatibility:
This paint is designed for a wide range of materials including plaster, drywall, wood, metal (with appropriate primer if necessary), masonry, and previously painted surfaces.
Care:
Clean tools and spills immediately with water. For maintenance, wipe surfaces with a damp cloth and mild detergent. Avoid abrasive cleaners.
