Regatta Birchdale II Waterproof Jacket - Navy Blue

Isotex 15000 refers to the jacket's waterproof and breathability ratings. '15000' in waterproof rating means it can withstand 15,000mm of water before it starts to seep through, indicating excellent rain protection. For breathability, it means the fabric allows 15,000 grams of water vapor to pass through per square meter in 24 hours, keeping you comfortable during active use.

The Birchdale II is a waterproof shell, providing excellent protection against rain and wind. For extreme cold, it's best used as the outer layer in a layering system. You'll need to wear insulating base and mid-layers underneath to provide the necessary warmth.

Yes, but use a technical cleaner specifically designed for waterproof breathable fabrics. Avoid conventional detergents, fabric softeners, and bleach. Always close all zippers and fastenings, and wash on a cold, gentle cycle. Info needed: Always refer to the care label for precise instructions.

Reapply the DWR when you notice water no longer beads up on the fabric surface but instead soaks in, a phenomenon known as 'wetting out.' The frequency depends on how often you wear and wash the jacket, but typically every few months with regular use.

The product description mentions a chest pocket and two lower pockets, all with hi-tech water repellent zips. It does not explicitly state the presence of internal pockets. Info needed: Confirmation of internal pocket availability.

This jacket is ideally suited for high-level hikes, trekking, mountain walking, and general outdoor activities where reliable waterproof and breathable performance is essential. Its design supports active movement in challenging weather conditions.

The jacket features a 'grown-on technical hood,' which means it is integrated into the jacket and is not designed to be detached.

This could indicate reduced breathability. Ensure you are wearing appropriate base and mid-layers that wick moisture. Also, check if the DWR finish needs re-application, as a 'wetted out' outer fabric can hinder breathability.

The durable water-repellent (DWR) finish has likely worn off. Wash the jacket using a technical cleaner and then apply a new DWR treatment (spray-on or wash-in) specifically designed for waterproof breathable fabrics.

Dirt and debris can accumulate in zipper teeth. Clean the zipper thoroughly with a small brush and mild soap, then apply a silicone-based zipper lubricant to ensure smooth operation.

Inspect the taped seams for any signs of peeling or damage. If visible damage, the seam tape may need professional repair or re-sealing. For minor issues, a seam sealant can be applied.

Wash the jacket using a technical cleaner designed to remove odors from performance fabrics. Ensure thorough rinsing and complete drying before storage. Avoid prolonged storage in damp conditions.