Zinsser Bulls Eye 1-2-3 Plus Primer - 2.5 L - Grey

Yes, it is suitable for both interior and exterior use.

Light sanding is recommended on glossy surfaces to improve adhesion. For other surfaces, ensure they are clean and dry.

Allow the primer to dry for at least one hour or as recommended on the product label before applying the topcoat.

While it blocks stains, it's not a mold-killing product. Treat mold with a mold remover before priming.

It is compatible with most latex and oil-based topcoats.

Clean up brushes and rollers immediately with soap and water.

Yes, it is available in grey and white color families to match your project needs.

Ensure the surface is clean, dry, and properly prepared. Lightly sand glossy surfaces before priming.

Apply a second coat of primer, especially in areas with heavy staining. Ensure the primer is fully dry before applying the topcoat.

Make sure the surface is properly prepared, remove any loose paint or residue, and ensure full drying time between coats.

Ensure proper ventilation during application and drying. The water-based formula has a low odor, but ventilation is still recommended.