Lay-Z-Spa Miami AirJet - 4 Person

Heating time varies based on the starting water temperature and ambient conditions, but it typically takes several hours to reach the maximum temperature of 40°C.

The filter cartridge should be cleaned regularly and replaced every two weeks or as needed depending on usage.

You will need chlorine or bromine, pH adjusters, and possibly a water clarifier. Refer to the manual for specific guidance.

Use the ChemConnect dispenser to add chemicals and test the water regularly using a test kit or strips. Adjust chemicals as needed.

Freeze Shield prevents the water from freezing during cold weather by circulating the water to prevent the build-up of ice. This helps prevent damage to the pump and liner of the spa.

Yes, with the Freeze Shield technology and proper winterization procedures, the Lay-Z-Spa Miami AirJet can be used outdoors in winter.

The product includes a warranty. Please refer to the documentation included with your product for specifics.

The Lay-Z-Spa Miami AirJet is designed to comfortably accommodate up to 4 people.

Check the power supply and ensure the heater setting is correctly configured on the control panel. Verify the water temperature setting isn't already reached.

Check and clean the filter cartridge. Also, inspect the pump for any blockages or air leaks.

Consult the user manual for specific error code meanings and follow the recommended troubleshooting steps.

Check water chemistry, add chemicals as needed, and clean or replace the filter cartridge. Perform a water balance test to ensure correct levels of chlorine/bromine and pH are maintained.

Ensure the pump is plugged into a functioning outlet. Check the circuit breaker to make sure it hasn’t tripped. Also, check the filter to see if it is clogged.