Best current price£15.04from The Range
Shopping.co.uk recommended and popular offers
The Range£15.04Visit shop Jrp Riveting Products 4.0 X 14Mm Aluminium/Steel Countersunk Head Rivets - Jrpasks4014 - Box Of 500 - Grey
Visit shop28 offers from £15.04 - £24.01
View price history by clicking the chart icon.
Designed for professionals and DIY enthusiasts in automotive, construction, and general repair sectors, these JRP Riveting Products provide a robust, flush-fitting fastening solution for projects requiring moisture resistance. Combining an aluminium body with a steel mandrel, these sealed rivets offer excellent corrosion resistance and durability, though users should ensure they have a compatible riveter capable of handling the 4.8mm diameter shaft for a proper installation.
| Colour | Silver |
|---|---|
| Model Part Number | 1266697 |
| Brand | JRP Riveting Products |
A sealed rivet prevents water, air, and dust from passing through the rivet installation point, making it ideal for weather-exposed areas.
Yes, to achieve a flush finish with this specific rivet, you must use a countersink bit to create a chamfered hole for the head to rest in.
While technically possible, these rivets are primarily designed for metal-to-metal or metal-to-rigid plastic applications.
The body is made of aluminium for corrosion resistance, while the internal mandrel is made of steel for structural strength.
While the aluminium body is corrosion-resistant, verify the steel mandrel is coated or treated if used in highly saline, direct marine conditions.
Ensure the pilot hole has been properly countersunk using a countersink bit before installation.
Check that the drill bit size matches the specified diameter of the rivet; an oversized hole will prevent proper expansion.
Ensure you are using the correct nosepiece for the 4.8mm diameter rivet and verify the rivet gun is aligned straight with the surface.
To achieve the best results, use a high-quality hand-operated or pneumatic rivet gun. Before installation, clean the contact surfaces to remove any grease or debris. Ensure your rivet gun has the correct 4.8mm nosepiece installed. When installing, place the rivet into the prepared hole and apply steady pressure with the tool to pull the mandrel through, expanding the rivet body to lock it in place. Because these are sealed rivets, store them in a cool, dry place to prevent premature corrosion of the steel mandrel before use.
