Best current price£16.12from The Range
Shopping.co.uk recommended and popular offers
The Range£16.12Visit shop Jrp Riveting Products 4.8 X 11 Aluminium/Steel Countersunk Head Sealed Rivets Jrpasks4811 Box Of 500 - Grey
Visit shop8 offers from £16.12 - £23.17
View price history by clicking the chart icon.
Designed for professionals and DIY enthusiasts alike, these 4.8 x 11 countersunk head sealed rivets from JRP Riveting Products provide a secure, flush-mount fastening solution for automotive, construction, and general repair tasks. The primary advantage of this product is its sealed construction, which offers superior resistance to environmental factors compared to standard open-end rivets, though users should ensure they have a compatible rivet gun capable of handling the 4.8mm diameter shaft for successful installation.
| Colour | Grey |
|---|---|
| Model Part Number | Jrpasks4811 |
| Brand | JRP Riveting Products |
These rivets are primarily designed for metal and rigid plastic applications where a hole can be drilled and properly supported.
A sealed rivet prevents air, moisture, and debris from passing through the hole, providing a weather-resistant seal.
You need a standard rivet gun capable of handling 4.8mm diameter rivets.
If the hole is too large, the rivet may not expand correctly against the material, leading to a weak or loose connection.
Due to their sealed design, they offer better protection than standard rivets, but you should verify compatibility with your specific environment's corrosion requirements.
The pilot hole may not be countersunk deeply enough; use a countersink bit to expand the opening slightly.
Ensure you are using the correct nosepiece size (4.8mm) on your rivet gun and that the tool is sufficiently lubricated.
Verify the material thickness is appropriate for the 11mm length of the rivet; if the material is too thin, the rivet will not expand correctly.
Before starting your project, ensure you have a high-quality manual or pneumatic rivet gun that supports 4.8mm fasteners. To install, drill a hole through your materials that matches the diameter of the rivet shaft. If you desire a flush finish, use a countersink bit to widen the top of the hole until the rivet head rests level with the surface. Insert the rivet, activate the rivet gun to pull the mandrel, and wait for the "pop" sound, indicating the rivet has properly expanded and the mandrel has broken away. Store these rivets in a dry, cool environment to maintain the integrity of their materials, and avoid exposing them to excessive moisture before installation.
