Craig & Rose 1829 Chalky Emulsion - White

This emulsion is designed for general interior use. It is not recommended for high-humidity areas like bathrooms unless specifically sealed, as the matt finish may be prone to marking in wet environments.

It features a quick-drying formula, typically touch-dry within a few hours, though drying times can vary based on ambient room temperature and humidity.

If painting over bare plaster or highly absorbent surfaces, a primer or a mist coat (watered down emulsion) is essential for best results.

Yes, it is formulated with low VOCs to ensure minimal odors and better air quality during the painting process.

Yes, the paint is formulated for smooth application, but always check your equipment specifications for the required paint viscosity.

Since this is an emulsion-based paint, brushes and tools should be cleaned immediately using warm soapy water.

Ensure you are using a high-quality synthetic brush or a medium-pile roller and avoid overworking the paint once it begins to tack up.

Verify the surface was properly cleaned and degreased before application. If the surface is highly porous, apply a primer first.

This is often due to uneven application or excessive thinning. Ensure the paint is stirred properly and applied at the recommended spread rate.