Craig & Rose 1829 Chalky Emulsion - White - 2.5L

While it is a high-quality interior emulsion, the flat matt finish is not specifically formulated for high-humidity areas; a bathroom-specific paint is generally recommended for those environments.

Coverage typically depends on the porosity of the surface, but on average, 2.5L covers approximately 30-35 square meters with a single coat.

It is not recommended to apply this directly over high-gloss surfaces; you should sand the gloss paint down to provide a "key" or use a universal primer first.

The chalky, matt finish is delicate. It can be wiped gently with a soft, damp cloth, but aggressive scrubbing may mark the surface.

Under normal room temperature conditions, allow at least 2 to 4 hours between coats for the best results.

Thin the paint slightly with a small amount of water or use a higher quality synthetic filament brush to ensure better leveling.

This usually indicates the surface was damp, dusty, or greasy prior to painting; ensure full cleaning and priming before recoating.

Apply an additional coat, ensuring you maintain a wet edge throughout the application process.