Best current price£49.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£49.99Visit shop B&Q - One CoatUltra Heavy Duty Garage Floor Paint5 LitresFir Green
Visit shop1 offer from £49.99
View price history by clicking the chart icon.
This guide is for homeowners and DIY enthusiasts looking for a durable, single-pack solution for their garage floors. The key benefit is its ultra-heavy-duty protection requiring no primer or sealer, saving time and effort. A potential caveat is the importance of thorough surface preparation for optimal adhesion. This paint offers extreme durability against heavy vehicles, UV protection, and resistance to mold and fungi, providing a smooth, professional finish.
| Colour | Green |
|---|---|
| Model Part Number | SIRAM-GFLOOR |
| Brand | SIRAMICO COATINGS |
No, this is a single-pack paint designed for direct application without the need for a separate primer or sealer.
The paint is fast-drying, with a drying time of 1-2 hours between coats. A second coat can be applied after 2 hours.
This paint is suitable for concrete, brick, and stone surfaces.
The surface must be clean, dry, and free from grease, dirt, and loose material. Pressure washing or chemical cleaning is recommended to remove mold and dirt.
It is recommended to wait a few days for heavy use like parking a car, although light foot traffic is usually possible after 24 hours, depending on drying conditions.
The approximate coverage is 7 square meters per litre.
The paint offers durable protection against wear and tear, including resistance to typical garage substances like oil drips and tire marks, provided spills are cleaned promptly.
Ensure the surface was thoroughly cleaned, degreased, and completely dry before application. Remove any loose or flaking material.
Apply paint evenly with consistent pressure. Use a high-quality roller or brush suitable for floor paints. Ensure paint is well-mixed.
Drying times are dependent on temperature and humidity. Ensure adequate ventilation and avoid applying in excessively cold or humid conditions.
Ensure all existing mold was completely removed during preparation. For persistent issues, consider a dedicated mold treatment before applying the paint.
Surface Preparation:
Before application, the concrete, brick, or stone surface must be thoroughly cleaned. Remove all existing mold, dirt, grease, and loose materials. Pressure washing is recommended for heavy dirt and mold. Alternatively, chemical cleaning agents can be used. Ensure the surface is completely dry before painting.
Application:
Mix the paint thoroughly. Apply using a brush, roller, or airless sprayer. A first coat can be applied, and a second coat can be applied after 2 hours. Allow the paint to dry for 1-2 hours between coats.
Compatibility:
Suitable for concrete, brick, and stone surfaces. Not intended for use on previously coated or sealed surfaces without proper preparation.
Care:
Clean spills promptly. For routine cleaning, use a damp cloth or a mild detergent solution. Avoid abrasive cleaners that could damage the finish.
