Innov8 Coatings Upvc Paint - Anthracite Grey - 250 Ml - Satin Finish

No, this Innov8 Coatings uPVC Paint is formulated to bond directly to uPVC surfaces without the need for a primer.

The paint delivers a premium satin finish.

Yes, it is suitable for uPVC conservatories, including roofline elements like soffits and fascias.

Drying times can vary based on environmental conditions. Refer to the product packaging for specific drying and recoating times.

Yes, the paint is designed for use on both interior and exterior uPVC surfaces.

Clean with a soft, damp cloth and mild soap. Avoid abrasive cleaners.

The 250ml size is ideal for smaller jobs and touch-ups. For a full front door, you may need to assess the surface area and potentially use more than one can, depending on the door size and number of coats required.

Ensure the uPVC surface was thoroughly cleaned and degreased before application. Re-clean the surface and consider light abrasion if adhesion issues persist.

Ensure paint is stirred thoroughly. Apply thin, even coats, working in one direction. Avoid over-brushing. Allow adequate drying time between coats if multiple are needed.

Stir the paint vigorously. If still too thick, check the product instructions for any recommended thinners, though this product is designed for direct application. If too thin, apply lighter coats.

Ensure the surface is not showing through. Apply another thin coat. Note that lighting conditions can affect color perception.