Innov8 Coatings Upvc Paint - Sage Green
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
Innov8 Coatings uPVC Paint in Sage Green is designed for homeowners and DIY enthusiasts looking to revitalize tired-looking exterior surfaces like windows, doors, and conservatories. It delivers a high-quality, professional satin finish that withstands the elements, though users must ensure the surface is meticulously cleaned and degreased to achieve the best adhesion results.
All features
| Colour | Green |
|---|---|
| Brand | Innov8 Coatings |
Extended Product Information
FAQs
Do I need to sand the uPVC before painting?
While the paint is formulated to adhere directly, a light scuffing with a fine-grade abrasive pad can improve mechanical key on very glossy or weathered surfaces.
Can this be used on interior uPVC?
Yes, the paint is suitable for both interior and exterior use, providing the same durable finish.
How many coats are typically required?
For best results and even coverage, we recommend two full coats.
Can I use this paint on wooden frames?
This product is specifically formulated for uPVC; it is not recommended for use on timber.
What is the best way to clean the brushes after use?
Since this is a high-quality water-based formula, brushes can be cleaned with warm, soapy water.
Troubleshooting
Paint is peeling or flaking shortly after application
This usually indicates inadequate surface preparation. Ensure the surface was completely free of grease and contaminants before painting.
Visible brush marks or uneven finish
Apply thinner coats and use a high-quality synthetic brush designed for water-based paints. Avoid over-brushing the paint as it begins to dry.
Paint is taking too long to dry
Ensure the application environment is not too humid or cold. High humidity significantly slows down the curing process.
Pros and Cons
Pros
- No primer required saves time and cost
- High-quality satin finish looks professional
- Specific formulation ensures long-lasting adhesion
- Highly resistant to UV-induced colour fading
- Suitable for a variety of surfaces like soffits and fascias
Cons
- Surface preparation is critical for success
- Requires careful application to avoid runs
- Limited to specific colour palette options
Setup, Compatibility & Care
Before starting, ensure the uPVC surface is completely dry and free from dust, dirt, and grease; using a specialized uPVC cleaner is highly recommended. The paint is compatible with most standard exterior uPVC windows, doors, conservatories, and roofline products like soffits and fascias. Apply using a high-quality synthetic brush or a fine-nap roller for the best finish. For maintenance, simply wipe the painted surface with a damp, non-abrasive cloth to remove dirt, avoiding harsh chemical cleaners that could degrade the satin finish.