Regatta Freesdale Hooded Waterproof Jacket - Brown - S

'Isotex 30000' refers to Regatta's advanced waterproof and breathable fabric technology. The '30000' indicates a high level of waterproofing (30,000mm hydrostatic head) and breathability (30,000 g/m²/24 hours).

Wash on a gentle cycle at 40°C with a mild liquid detergent, avoiding bleach and fabric softeners. Rinse thoroughly and tumble dry on low heat or hang dry. Reapply DWR treatment periodically.

This jacket is designed for waterproofing and breathability. For very cold weather, it is recommended to layer insulating clothing underneath. The jacket itself provides a windproof and waterproof shell.

The wire in the hood's peak helps to give it shape and structure, allowing it to better shield your face from rain and wind while maintaining visibility.

While the jacket itself is waterproof, the pockets are designed for general storage and may not be fully waterproof. It is advisable to use waterproof dry bags for sensitive electronic devices or valuables.

The frequency depends on usage and washing. A general guideline is to reapply DWR treatment when water no longer beads up on the fabric surface, typically after several washes or significant wear.

This jacket is available in various sizes. Please refer to the product listing or size chart for specific available sizes.

Ensure all seams are intact. Reapply a DWR treatment to the outer fabric. Check that zippers are fully closed and adjusters are tightened.

Verify that the jacket is not overloaded with non-breathable layers underneath. Ensure the jacket is clean, as dirt and oils can impede breathability. Check if ventilation is adequate (if applicable, e.g., underarm zips if present on other models).

Clean the zipper teeth gently with a damp cloth and a small brush. Apply a silicone-based lubricant or wax to the zipper teeth.

Ensure the wire peak is correctly positioned and bent to suit your facial structure. Check that all hood adjusters are functioning correctly.