All Purpose Automotive Spray Paint - 250ml - Auto Extreme
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This Auto Extreme All Purpose Automotive Spray Paint is designed for DIY enthusiasts and professionals seeking a reliable, quick-drying solution for touching up or customizing automotive metal surfaces. Its primary benefit is excellent coverage and adhesion for both interior and exterior applications, though users should be aware of its 250ml container size, which may require multiple cans for larger projects. Key features include its aerosol application, clear lacquer finish, and suitability for metal.
All features
| Model Part Number | 1905 |
|---|---|
| Brand | Auto Extreme |
| Container Volume | 250ml |
Extended Product Information
FAQs
What surfaces can this spray paint be used on?
This paint is specifically designed for metal surfaces. It is not recommended for plastic, rubber, or other materials without proper preparation and primers.
How long does it take to dry?
The paint dries quickly, but recoating times and full cure times will vary depending on temperature, humidity, and applied thickness. Always refer to the product label for specific drying times.
Can I use this for large automotive painting projects?
The 250ml can is best suited for touch-ups, small parts, or minor repairs. For larger areas, you will likely need multiple cans to ensure consistent color and sufficient paint volume.
Do I need a primer before using this paint?
For best results and adhesion on bare metal, it is recommended to use a compatible automotive primer. Ensure the surface is properly prepared according to the primer manufacturer's instructions.
How do I clean the spray nozzle if it gets clogged?
After use, invert the can and spray for a few seconds to clear the nozzle. If the nozzle becomes clogged during use, you can try carefully soaking it in a suitable solvent like lacquer thinner, then re-attaching it.
Is this paint suitable for interior car parts?
Yes, this all-purpose automotive spray paint is suitable for both interior and exterior metal surfaces.
Troubleshooting
Uneven spray or spitting
Shake the can more vigorously and ensure the nozzle is not clogged. Try clearing the nozzle by spraying upside down.
Paint not adhering well
Ensure the metal surface was properly cleaned, degreased, and lightly sanded before application. Check for excessive moisture.
Runs or drips
Apply paint in thin, even coats from the recommended distance (typically 10-12 inches). Avoid applying too much paint at once.
Nozzle clogged after use
Turn the can upside down and spray for 2-3 seconds to clear the propellant and paint from the nozzle. If still clogged, remove and clean the nozzle carefully with a solvent if possible.
Pros and Cons
Pros
- Convenient aerosol spray for easy application.
- Dries quickly, reducing project time.
- Provides good coverage and adhesion on metal.
- Suitable for both interior and exterior automotive use.
- Clear lacquer finish adds protection and shine.
Cons
- 250ml can size may be insufficient for large areas.
- Primarily designed for metal surfaces.
- Requires proper ventilation during use.
- May require multiple coats for deep color coverage.
Setup, Compatibility & Care
Setup:
- Ensure the metal surface is clean, dry, and free from grease, wax, or rust.
- Lightly sand the surface if necessary for optimal adhesion.
- Shake the can vigorously for at least two minutes before use.
- Test spray on a small, inconspicuous area first.
Compatibility:
This spray paint is specifically formulated for use on metal surfaces. It is not recommended for use on plastic, rubber, or other non-metallic materials without appropriate primers.
Care:
- Store cans in a cool, dry place, away from direct sunlight and heat sources.
- After use, turn the can upside down and spray for a few seconds to clear the nozzle and prevent clogging.