Classic Signature Multi-Purpose Spray Paint 400Ml - Black

This multi-purpose spray paint is suitable for use on metal, plastic, wood, glass, and other primed surfaces for both interior and exterior applications.

The paint is quick-drying. Specific drying times (touch dry, recoat) will be detailed on the product can, but typically it allows for recoating within a short period.

While the paint is versatile, priming is recommended for certain surfaces (like very glossy or porous materials) or for maximum adhesion and durability, especially for exterior use.

Clean up any spills or tools immediately after use with a suitable solvent as recommended on the product packaging. Once dry, the paint is more difficult to remove.

This is a general multi-purpose spray paint and is not specifically formulated for high-heat applications. For such uses, a specialized high-heat paint would be necessary.

Yes, you can paint over existing paint, provided the original paint is in good condition, clean, and lightly sanded for adhesion. For best results, ensure compatibility or use a primer.

Coverage can vary depending on the surface and application thickness, but a 400ml can typically covers approximately 1.5 to 2 square meters with a single coat.

Shake the can more vigorously. Ensure the nozzle is not clogged; if it is, try clearing it with a fine pin or replacing the nozzle. Apply from the recommended distance.

Ensure the surface was properly prepared (clean, dry, free from grease/dust). Lightly sand glossy surfaces before application. Allow adequate drying time between coats.

Apply paint in thinner, lighter coats. Maintain a consistent distance from the surface and use a steady motion. Allow proper drying time between coats.

Shake the can thoroughly. Ensure the nozzle is not blocked. Check if the propellant has been depleted; if so, a new can is required.