Shopping.co.uk

Classic Signature Multi-Purpose Spray Paint - Red Gloss 400ml

Not AvailableClassic Signature Multi-Purpose Spray Paint - Red Gloss 400ml

Easy to Use on: Metal, Plastic, Wood, Glass and more. Suitable for Interior & Exterior Usage. Leav...

Currently unavailable

Colour
BlackBlueGoldGreenGreyRedSilverWhite

Currently out of stock

This product is not available at the moment. Check back later.

Product Information

Full details

This Classic Signature Multi-Purpose Spray Paint in Red Gloss is ideal for DIY enthusiasts and hobbyists looking for a quick and effective way to refresh or customize various surfaces. Its key benefit is delivering a fantastic, durable finish with minimal effort. A minor caveat is that achieving perfect results requires proper surface preparation and application technique.

All features

ColourRed
Model Part Number445874
BrandClassic Signature

Extended Product Information

FAQs

How many coats of paint should I apply?

For best results and durability, we recommend applying 2-3 thin, even coats. Allow sufficient drying time between each coat as per the can's instructions.

Can this paint be used on fabric?

This multi-purpose spray paint is not specifically formulated for fabric and may not provide a flexible or durable finish on textiles. It is best suited for hard surfaces like metal, wood, plastic, and glass.

What is the best temperature for applying this paint?

Ideally, apply the paint in temperatures between 15°C and 25°C (59°F and 77°F). Avoid applying in very cold, hot, or humid conditions, as this can affect drying and finish quality.

How long does it take to dry?

The paint is typically touch-dry within 15-20 minutes and ready for a recoat within 1 hour. Full curing can take 24-48 hours, depending on temperature and humidity.

Can I paint over existing paint?

Yes, you can paint over existing paint, provided the surface is clean, dry, and sound. If the existing paint is peeling or in poor condition, it should be removed and the surface prepared before application.

Does this paint require a primer?

While the paint adheres well to many surfaces, using a suitable primer can enhance adhesion, durability, and color vibrancy, especially on challenging surfaces like bare metal or certain plastics. For optimal results, priming is often recommended.

Troubleshooting

Uneven spray or splattering

Ensure the can is shaken sufficiently. Hold the can upright and at a consistent distance (approx. 25-30 cm) from the surface. Clear any blockages from the nozzle by spraying upside down after use or using a suitable solvent if necessary.

Paint not adhering well or peeling

The surface may not have been properly prepared. Ensure it was clean, dry, and free from grease or dust. Light sanding might be required for non-porous surfaces. Ensure the recommended drying times between coats were followed.

Runs or drips

This usually occurs from applying the paint too thickly or holding the can too close. Apply paint in thin, even coats. If drips occur, allow the paint to dry, then lightly sand the area and reapply carefully.

Can won't spray

Check if the nozzle is blocked. Try clearing it with a fine needle or solvent. Ensure the can is adequately shaken and held upright. If the can is empty, replace it.

Pros and Cons

Pros

  • Applies easily to multiple surfaces.
  • Suitable for both indoor and outdoor projects.
  • Provides a durable and attractive finish.
  • Fast drying time speeds up the painting process.
  • Achieves good results with relative ease.

Cons

  • Requires proper ventilation during use.
  • Surface preparation is crucial for optimal adhesion.
  • May require multiple coats for full opacity.
  • Gloss finish can highlight imperfections if the surface isn't smooth.
  • Color may vary slightly from on-can swatch depending on application.

Setup, Compatibility & Care

Setup:

  1. Prepare the Surface: Ensure the surface is clean, dry, and free from dust, grease, and rust. Lightly sand if necessary for better adhesion, and wipe clean.
  2. Ventilation: Use in a well-ventilated area, preferably outdoors or in a space with open windows.
  3. Masking: Protect surrounding areas with masking tape and paper.
  4. Shake the Can: Shake the spray can vigorously for at least two minutes before and occasionally during use.

Compatibility:

This paint is compatible with most common surfaces including:

  • Metal
  • Plastic
  • Wood
  • Glass
  • Primed surfaces

Care:

  • Allow the paint to cure fully before exposing it to heavy use or cleaning. Typically, this takes 24-48 hours.
  • Clean the nozzle immediately after use by turning the can upside down and spraying until clear.
  • Store the can in a cool, dry place away from direct sunlight and heat sources.