Setup, Compatibility & Care
Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and loose paint. Fill any cracks or holes and sand down any rough areas. For previously glossed surfaces, a light sanding is recommended. Apply a suitable primer if necessary, especially on new plaster or porous surfaces.
Application: Stir the paint thoroughly before use. Apply evenly using a brush, roller, or spray. For best results, apply two coats, allowing adequate drying time between applications. Avoid painting in excessively damp or cold conditions.
Compatibility: Suitable for use on interior walls and ceilings. Not recommended for use in high-moisture areas like bathrooms or kitchens unless specifically stated on the product label for such environments. Always test in an inconspicuous area if unsure.
Care: Clean brushes and equipment immediately after use with water. For cleaning decorated surfaces, use a soft cloth slightly dampened with water. Avoid abrasive cleaners or excessive rubbing, as this can damage the matt finish.