Pliolite Masonry Paint - Grey - 5 Litre

The paint becomes rainproof in approximately 20 minutes after application.

This paint is specifically designed for masonry surfaces such as cement, rendering, rough cast, brick, and concrete. It is not recommended for wood or metal.

For optimal performance and adhesion on porous surfaces like concrete or brick, we recommend applying Pliocem Concrete Sealer first and allowing it to dry completely before applying the masonry paint.

The paint performs best when applied in temperatures between 5°C and 25°C.

Yes, this paint is suitable for use on previously painted masonry surfaces, provided the existing paint is sound and well-adhered.

Clean all application tools with water immediately after use before the paint dries.

Coverage varies depending on the surface porosity and texture. Please refer to the product tin for specific coverage details, typically around 10-12 square meters per litre.

Ensure the surface was properly prepared, clean, and dry. For porous surfaces, check if Pliocem Concrete Sealer was applied and allowed to dry before painting.

Ensure paint was stirred thoroughly. Apply in consistent, even coats, avoiding over-brushing. Check for extreme temperature or humidity during application.

Ensure the paint has had at least 20 minutes to become rainproof. Application in conditions below 5°C or above 25°C may affect drying and rain resistance.

Apply a thinner, even coat. If covering a very dark or stained surface, a second coat may be necessary after the first has dried.