Pliocem Pliolite Masonry Paint - Black
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for homeowners and DIY enthusiasts looking for a durable, weather-resistant masonry paint. The Palatine Paints Pliocem Pliolite Masonry Paint in Black offers excellent adhesion and protection against moisture and alkali attack, with a key benefit of being rainproof in just 20 minutes, allowing application even in damp or cold conditions. A potential consideration is that it performs best on porous surfaces when used with a specific sealer.
All features
| Colour | Black |
|---|---|
| Brand | Palatine Paints |
Extended Product Information
FAQs
What surfaces can I use this paint on?
This paint is suitable for cement, rendering, rough cast, brick, and concrete. It can be used on both new and previously painted surfaces.
How long does it take to be rainproof?
The paint is rainproof in approximately 20 minutes after application.
Can I apply this paint in cold or damp weather?
Yes, a key benefit of this paint is its tolerance to damp and cold weather during application, allowing it to be rainproof quickly.
Do I need to use a sealer with this paint?
While the paint performs well on its own, it performs best on porous surfaces when used with Pliocem Concrete Sealer.
How should I prepare my wall before painting?
Ensure the surface is clean, dry, and free from loose debris, mold, or efflorescence. Apply a coat of Pliocem Concrete Sealer if the surface is porous.
How do I clean my brushes after use?
Clean tools and brushes immediately after use with water.
What is the main advantage of this paint?
Its principal benefit is tolerance to damp and cold weather during application, coupled with being rainproof in just 20 minutes.
Troubleshooting
Paint not adhering well
Ensure the surface was properly prepared, free from dust, grease, or loose material. Use Pliocem Concrete Sealer on porous surfaces before application. Ensure adequate drying time between coats.
Uneven finish or brush marks visible
Stir paint thoroughly before and during use. Apply evenly with consistent strokes. Use a good quality brush or roller suitable for masonry paint. Ensure correct application thickness.
Paint shows signs of blistering or peeling
This can indicate trapped moisture. Ensure the surface was dry before painting (unless applying in permitted damp conditions) and that there is adequate ventilation for drying. Check for underlying damp issues in the structure.
Poor coverage
Ensure two coats are applied as recommended. Stir the paint well. Check that the surface is not excessively porous; if so, a coat of Pliocem Concrete Sealer may be needed.
Pros and Cons
Pros
- Fast drying time reduces application time and risk of wash-off.
- Can be applied in a wider range of weather conditions compared to standard paints.
- Offers strong protection against common masonry issues like moisture and alkali.
- Suitable for various masonry types and both new and old surfaces.
- Ensures long-lasting results with excellent adhesion.
Cons
- Requires a specific Pliocem Concrete Sealer for optimal performance on porous surfaces.
- The black color may show dust and dirt more readily than lighter shades.
- Primarily designed for masonry; may not be suitable for all exterior finishes.
- Application in very cold or damp conditions might still require careful monitoring.
Setup, Compatibility & Care
Preparation: Ensure surfaces are clean, dry (unless applying in damp conditions, ensuring no standing water), and free from loose debris, mold, or efflorescence. Previously painted surfaces should be sound. For optimal adhesion and performance, particularly on porous substrates like new concrete or rendering, apply one coat of Pliocem Concrete Sealer before painting.
Application: Stir the paint thoroughly before use. Apply using a brush or roller suitable for masonry paints. Apply evenly, avoiding over-application. Two coats are generally recommended for best results, allowing adequate drying time between coats as per manufacturer instructions.
Compatibility: Primarily designed for cement, rendering, rough cast, brick, and concrete. It can be used on both new and previously painted surfaces. Not recommended for use on asbestos or surfaces coated with bitumen or chlorinated rubber.
Care: Clean tools and brushes immediately after use with water. For maintenance, surfaces coated with this paint can typically be cleaned gently with a damp cloth or a mild detergent solution. Avoid abrasive cleaners.