Best current price£115.41from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£115.41Visit shop Pliocem? Pliolite Masonry Paint |15 Colours | 2.5Lt | 5Lt (5 Litre, Anthracite Grey) 5055671727874
Visit shop1 offer from £115.41
View price history by clicking the chart icon.
This Palatine Paints Pliocem® Pliolite Masonry Paint in Grey is designed for homeowners and professionals seeking a durable, weather-resistant coating for masonry surfaces. Its key benefit is rapid rainproof protection in just 20 minutes, even in damp or cold conditions. A potential caveat is the recommendation for using a specific sealer on porous surfaces for optimal performance. This long-lasting paint offers excellent adhesion and resistance to moisture and alkali attack.
| Colour | Grey |
|---|---|
| Brand | Palatine Paints |
The paint is rainproof in approximately 20 minutes under normal conditions.
Yes, it is suitable for use on previously painted masonry surfaces, provided the existing paint is sound and well-adhered.
For optimal performance and adhesion on porous surfaces such as brick or concrete, it is recommended to use Pliocem Concrete Sealer before applying the masonry paint.
It is designed for cement, rendering, rough cast, brick, and concrete surfaces.
The paint has tolerance to damp and cold weather during application, allowing it to be rainproof quickly. However, avoid application in temperatures below 5°C or when frost is expected.
Tools should be cleaned immediately after use with water.
Coverage varies depending on the surface porosity and texture. Always refer to the product's packaging for specific coverage details.
Ensure the surface was properly prepared and free from dust, grease, or old flaking paint. For porous surfaces, a coat of Pliocem Concrete Sealer may be required before painting.
Ensure paint was thoroughly stirred before application. Apply in consistent, even coats, maintaining a wet edge. Check for excessive absorption into the substrate; consider a primer or sealer if needed.
Check the weather conditions. While rainproof in 20 minutes, very heavy rain shortly after application might still cause issues. Ensure the product has had adequate time to form its initial film before exposure to significant moisture.
This can occur in very cold or humid conditions. Ensure application was within recommended temperature and humidity ranges. Allow for extended drying time in adverse conditions.
Preparation: Ensure surfaces are clean, dry, and free from loose paint, dirt, or grease. For chalky or porous surfaces, apply Palatine Paints Pliocem Concrete Sealer before painting. New masonry should be allowed to cure for at least six months before application.
Application: Stir the paint thoroughly before use. Apply with a brush or roller. Apply one or two coats as needed, allowing adequate drying time between coats. Avoid application in excessively high temperatures, strong winds, or when rain is imminent within the drying period.
Compatibility: Suitable for use on cement, rendering, rough cast, brick, and concrete. It can be applied over existing, sound masonry paint. Do not use on surfaces that are constantly damp or prone to condensation.
Care: Clean brushes and equipment immediately after use with water. Once dry, the painted surface can be cleaned with a damp cloth and mild detergent if necessary. Avoid abrasive cleaners.
