Britwall Light Stone Crushed Texture PU Wall Panel - 1200 x 600mm

You will need a measuring tape, level, utility knife or saw, adhesive, and a soft cloth for cleaning.

They can be used in bathrooms, but ensure the area is well-ventilated and not directly exposed to water. Consider sealing the edges for added protection against moisture.

Use a utility knife or a fine-toothed saw to cut the panels. Measure carefully and score the panels multiple times for a clean cut. For intricate cuts, use a jigsaw.

Use a construction adhesive specifically designed for PU materials. Follow the manufacturer's instructions for application and curing time.

Yes, these panels can be painted. Use a primer specifically designed for PU surfaces before applying paint.

The panels are not specifically fire-rated. Consider this when choosing them for a commercial setting and always check local building codes.

Carefully pry the panels off the wall, using a putty knife or similar tool. Be cautious not to damage the wall surface during removal. You may need to replace the damaged panels.

Ensure the wall surface is properly prepared, clean, and dry. Use an appropriate adhesive and follow the manufacturer's instructions. Apply sufficient adhesive to the panel and apply firm pressure during installation.

Ensure panels are aligned correctly during installation. Use a sealant or caulk to fill any gaps between panels if necessary. Consider the use of a color-matched sealant.

Handle panels with care and use appropriate tools to prevent scratches or damage. Cut panels carefully and use a sharp blade.