Ft Paints 400Ml Spray Can Texture Paint With Semi Gloss For Commercial Vehicles - Ral 6005-Moss Green
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for professionals and DIY enthusiasts working on industrial machinery, tools, lockers, and steel structures. The FabioT. RT 2K Polyurethane Texture Paint offers a durable, semi-gloss textured finish that conceals surface imperfections and provides a professional look. While it offers excellent protection, users should be aware of the need for proper ventilation due to its 2K formula.
All features
| Colour | Green |
|---|---|
| Model Part Number | FT-PU300-400AER-S-CV |
| Brand | FabioT. |
Extended Product Information
FAQs
What surfaces is this paint suitable for?
This RT 2K Polyurethane Texture Paint is designed for industrial machinery, components, lockers, tools, and steel structures. It offers excellent adhesion to metal surfaces.
What does '2K' mean in the product description?
'2K' refers to a two-component system, meaning the paint contains a base and a hardener that mix upon activation (in this case, via an aerosol mechanism). This creates a more durable and chemically resistant finish than traditional single-component paints.
Do I need a primer before using this paint?
For optimal adhesion and performance, especially on bare metal or when maximum durability is required, using a suitable metal primer is recommended. Always clean the surface thoroughly before application.
How long does it take for the paint to cure fully?
Curing times can vary based on temperature and humidity. While the paint may be touch-dry relatively quickly, full chemical and impact resistance typically develops over several days. Refer to the product can for specific curing guidelines.
Is this paint safe to use indoors?
This is a 2K product and requires excellent ventilation during application and curing. Ensure you use appropriate personal protective equipment, including a respirator, and that the area is well-aired.
Can I apply this paint with a brush?
This product is formulated for spray application using spray guns or airless equipment to achieve the intended textured finish and coverage. It is not designed for brush application.
What is the finish like?
The paint provides a semi-gloss textured finish. This texture helps to hide surface imperfections and provides a professional, decorative look.
Troubleshooting
Uneven spray pattern or sputtering
Ensure the can is held at the correct distance (refer to can instructions), shake the can vigorously and frequently during use, and check that the nozzle is not clogged. If clogged, try clearing it according to the manufacturer's instructions (often by inverting the can and spraying briefly).
Paint not adhering properly or peeling
The surface may not have been properly prepared. Ensure the metal is clean, dry, and free from grease, dust, or rust. A suitable primer may be required for optimal adhesion. Ensure the paint is applied within its recommended temperature range.
Runs or drips in the finish
The can may be held too close to the surface, or too much paint is being applied in one coat. Apply paint in thin, even coats, allowing adequate drying time between coats. Maintain a consistent spraying distance.
Weak resistance to chemicals or solvents
Ensure the paint has been fully cured. 2K paints require a specific curing time to achieve their maximum resistance properties. Check application conditions and ensure the correct product was used for the intended level of resistance.
Pros and Cons
Pros
- Provides a durable and impact-resistant finish.
- Excellent resistance to UV, weather, chemicals, and solvents.
- Hides surface imperfections for a professional aesthetic.
- Good adhesion to metal surfaces.
- Suitable for various industrial and commercial applications.
Cons
- Requires proper ventilation due to the 2K formula.
- Primarily designed for metal substrates; testing on other materials is recommended.
- Specific color options may be limited to those available in the product line.
Setup, Compatibility & Care
Setup:
This product is a 2K (two-component) aerosol. Ensure you read and follow all instructions on the can for activation and use. Typically, this involves removing a pin and pressing the activator button, then shaking the can thoroughly before application. Use in a well-ventilated area, ideally with appropriate personal protective equipment (PPE) such as gloves and a respirator.
Compatibility:
This paint is engineered for use on metal surfaces, including industrial machinery, components, lockers, tools, and steel structures. For best results, ensure the metal surface is clean, dry, and free from rust, grease, and old paint. A suitable primer may be necessary for optimal adhesion and performance, especially on bare metal. Always perform a small test patch on an inconspicuous area if using on materials other than bare or previously painted metal.
Care:
To maintain the finish, clean surfaces with mild soap and water. Avoid abrasive cleaners or solvents that could damage the coating. The inherent chemical and solvent resistance of the paint will protect against common workshop fluids. Ensure good ventilation in enclosed spaces where the paint has been applied to allow for proper curing and off-gassing.