Ft Paints 400Ml Spray Can Floor Paint With Semi Gloss Finish For Garages - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for individuals seeking a durable, protective, and aesthetically pleasing coating for industrial floors, garages, workshops, and warehouses. The FabioT. FT Paints 400ml Aerosol Floor Paint offers a semi-gloss, self-levelling finish with exceptional resistance to mechanical wear and chemicals. A key benefit is its fast drying time, making floors walkable within 24 hours, though proper substrate preparation is crucial for optimal adhesion and longevity.
All features
| Colour | White |
|---|---|
| Model Part Number | FT-EP275-400AER-G-GR |
| Brand | FabioT. |
Extended Product Information
FAQs
What surfaces can I apply this paint on?
This paint is primarily engineered for concrete substrates, commonly found in industrial floors, garages, workshops, and warehouses.
How long does it take for the floor to be ready for walking?
The floor is typically walkable after 24 hours, with a full cure achieved within 7 days.
Is this paint suitable for outdoor use?
While it offers excellent resistance to de-icing salts, its primary application is for indoor industrial environments. For outdoor use, consult the manufacturer's extended product line or technical data sheets for specific outdoor formulations.
Can I mix this paint with other products?
Yes, it is compatible with Mipa primers and can be mixed with quartz additives to create an anti-slip finish. Always follow manufacturer guidelines for any additives.
What is the recommended temperature for application?
The ideal application temperature is typically between 10°C and 30°C to ensure proper curing and finish quality.
How should I clean the painted floor?
Clean with a damp cloth or a mild detergent. Avoid using harsh abrasive cleaners.
What does 'solvent-free' mean for this product?
Solvent-free means the paint contains very low or no volatile organic compounds (VOCs) typically found in traditional paints, making it safer for indoor air quality and easier to handle.
Troubleshooting
Poor adhesion or peeling
Ensure the concrete surface was thoroughly cleaned and prepared before application. Check if a compatible primer was used, especially on very smooth or porous concrete. Reapply after proper surface preparation.
Uneven finish or streaks
Shake the aerosol can more frequently during use. Apply in consistent, thin coats. For larger areas, consider using a roller or trowel for a more uniform finish. Ensure consistent application distance if using aerosol.
Coating remains tacky after application
This can occur in conditions of high humidity or low temperatures. Ensure application within the recommended temperature and humidity range (typically 10-30°C). Allow for adequate ventilation. If it persists, contact technical support.
Scratching or damage from use
This indicates the coating has not fully cured or the surface is subjected to extreme wear. Ensure the full 7-day curing period is met before heavy use. For minor scratches, touch-up may be possible after careful surface preparation.
Pros and Cons
Pros
- Durable and long-lasting coating for high-traffic areas.
- Resistant to chemicals, oils, and abrasion.
- Fast curing time allows for quick return to service.
- Provides a smooth, attractive semi-gloss finish.
- Solvent-free formula is safer for the user and environment.
Cons
- Requires thorough surface preparation for best results.
- Aerosol can application may be less uniform on very large areas compared to bulk application.
- Limited to specific substrate types (primarily concrete).
- Once the aerosol can is activated, it must be used.
- May require compatible primers for optimal performance.
Setup, Compatibility & Care
Preparation is Key:
- Ensure the concrete surface is clean, dry, and free from dust, oil, grease, and loose particles.
- For best adhesion, especially on very smooth or porous concrete, consider using a compatible primer like Mipa primers.
- If an anti-slip surface is desired, incorporate quartz additives during application as per Mipa recommendations.
Application:
- Shake the aerosol can vigorously before use.
- Apply in thin, even coats using a roller, trowel, or notched trowel. Maintain a consistent distance from the surface for aerosol application. For best results, consider using compatible primers and applying via roller or trowel for larger areas.
Compatibility:
- Primarily designed for concrete substrates.
- Compatible with Mipa primers.
- Can be combined with quartz additives for enhanced slip resistance.
Care:
- Clean spills immediately to prevent staining.
- Regular cleaning with a damp cloth or a mild detergent is recommended.
- Avoid harsh abrasive cleaners that could damage the semi-gloss finish.