Dulux Trade Super Matt Emulsion Paint - White - 5L - 05010212011980
This emulsion paint is suitable for and covers up to 18 m² per litre on average. Dulux Trade Super...This emulsion paint is suitable for and covers up to 18 m² per litre on average. Dulux Trade Supermatt is a Dulux Trade matt emulsion which specializes in being as non-reflective as possible. If Dulux Trade Matt is not enough for you, try this. Only two coats of Dulux Trade Supermatt are enough to achieve its trademark high-opacity. Applicable with brushes and rollers available at the The Paint Shed. White colour of this product is an excellent choice for a ceiling, accompanied by non-matt, coloured walls. Take a look at other Dulux Trade Products available, and pick one of many available varieties. A top quality, economical, high-opacity matt emulsion which gives excellent coverage and application. Suitable for all interior wall and ceiling surfaces, particularly new plaster that is still drying out. High opacity Good coverage & application Ideal for new plaster High coverage
Dulux Trade Supermatt White 10LFree delivery in 1–3 days£89.26Visit shop →
Dulux Trade Supermatt Almond White 10L 5010212408704Free delivery in 1–3 days£100.62Visit shop →
Dulux Trade Supermatt Almond White 10LFree delivery in 1–3 days£100.62Visit shop →
Product Information
Full details
This guide is for anyone looking to use Dulux Trade Supermatt White 5L emulsion paint, ideal for interior walls and ceilings. The primary benefit is its high opacity and excellent coverage, especially on new plaster. However, be aware that drying times can vary based on temperature and humidity. This paint is a top-quality, economical matt emulsion, providing a non-reflective finish.
All features
Colour
White
Model Part Number
5091661
Brand
Dulux Trade
Extended Product Information
FAQs
What surfaces is Dulux Trade Supermatt suitable for?
It is suitable for all interior wall and ceiling surfaces, especially new plaster.
How many coats of paint are needed?
Typically, two coats are sufficient for excellent coverage.
How do I prepare the surface before painting?
Ensure the surface is sound, clean, and dry. Remove any loose material and fill imperfections.
Can I use this paint in a bathroom or kitchen?
Yes, it is suitable for use in kitchens, although consider using a moisture-resistant paint in areas directly exposed to water.
How should I store leftover paint?
Store in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the lid is sealed tightly.
What is the drying time?
Drying time is approximately 4 hours, but this can vary depending on temperature and humidity.
What tools can I use to apply this paint?
You can use a brush, roller, or spray to apply the paint.
What is the coverage rate?
The paint covers up to 18 m² per litre on average.
Troubleshooting
Paint is not covering the surface adequately.
Ensure the surface is properly prepared. Apply a second coat of paint. Make sure you are using the correct application technique.
Paint appears to be patchy after drying.
Ensure paint is stirred thoroughly before and during application. Apply even coats and avoid over-brushing or over-rolling.
Paint is taking a long time to dry.
Ensure proper ventilation in the room. Adjust the temperature and humidity levels if possible. Allow extra drying time between coats.
Pros and Cons
Pros
High opacity for excellent coverage
Suitable for various interior surfaces, including new plaster
Easy application with brush, roller, or spray
Water-based formula for easy cleanup
Provides a non-reflective matt finish
Available in a variety of white shades and other colours
Cons
Drying time is dependent on temperature and humidity
Requires proper surface preparation for best results
May require more than one coat for optimal coverage, especially over existing colours
Not suitable for outdoor use
Colour consistency is best achieved by purchasing sufficient paint from the same source at one time
Setup, Compatibility & Care
Setup
Surface Preparation: Ensure surfaces are clean, dry, and free from loose material. Remove any existing flaking paint and fill any holes or cracks.
Priming: On new or bare surfaces, apply a thinned first coat of Dulux Trade Supermatt (up to 1 part water to 3 parts paint).
Application: Apply two coats of Dulux Trade Supermatt (up to 1 part water to 5 parts paint). Allow the first coat to dry completely before applying the second coat.
Compatibility
Suitable Surfaces: Interior walls and ceilings, particularly new plaster, drywall, and previously painted surfaces.
Application Tools: Can be applied by brush, roller, or spray.
Care
Cleaning: After use, clean tools with water.
Storage: Store in a cool, dry place. Protect from frost and extreme temperatures. Do not store or use in extremes of temperature.