Dulux Trade Super Matt Wall & Ceiling Emulsion Paint - Magnolia - 5L
At B&Q we want you to be satisfied with your colour selection. Not all monitors will display colou...At B&Q we want you to be satisfied with your colour selection. Not all monitors will display colours the same and paint tins may not show the same colour as your walls do in natural light. We therefore recommend you order a tester pot online or pop in store to pick one up so you are sure that this is the right colour for you. Dulux Trade Supermatt is a superb high-opacity matt emulsion with easy application and excellent coverage. It works best wall and ceiling surfaces, particularly new plaster that’s still drying out. Apply with a brush, roller or spray, and make sure to seal any new or bare surfaces with thinned Dulux Trade Supermatt. It only takes two coats and is re-coatable within 2-4 hours. Coverage of 18m2/L. It comes in a lovely Magnolia colour, which adds warmth, yet preserves brightness and spaciousness of the interiors. The Dulux Trade range is a great choice for both professionals, and anyone embarking on a decorating project. Trusted by tradesmen and homeowners nationwide since 1931. This white emulsion paint has been specially designed to give a stunning finish to your walls and ceilings. Simply apply each coat with a brush or...
This guide is for anyone looking to use Dulux Trade Supermatt Magnolia 5L emulsion paint, whether you're a professional tradesperson or a homeowner undertaking a decorating project. The key benefit of this paint is its high opacity and excellent coverage, making it ideal for new plaster and providing a stunning matt finish. However, be aware that the colour on your walls might appear different than the colour displayed on your monitor. This guide will walk you through the features, uses, and care instructions to help you achieve the best results with Dulux Trade Supermatt.
All features
Colour
Beige
Model Part Number
5091667
Brand
Dulux Trade
Extended Product Information
FAQs
How much area does a 5L tin of Dulux Trade Supermatt cover?
A 5L tin covers approximately 18m² per litre, so a 5L tin will cover roughly 90m² in one coat. This can vary depending on the surface and application method.
What is the drying time for Dulux Trade Supermatt?
It is recoatable within 2-4 hours.
Can I use Dulux Trade Supermatt on exterior surfaces?
No, Dulux Trade Supermatt is suitable for interior use only.
How should I store leftover paint?
Store the paint in a cool, dry place, away from extreme temperatures and frost. Ensure the lid is sealed tightly to prevent the paint from drying out.
What is the best way to clean paint from brushes and rollers?
After use, remove as much paint as possible from the equipment before cleaning with water.
Do I need to prime before using Dulux Trade Supermatt?
On new or bare surfaces, you should seal the surface with a thinned first coat of Dulux Trade Supermatt (up to 1 part clean water to 3 parts paint). On previously painted surfaces, priming is not typically required if the existing paint is in good condition, but always ensure the surface is clean and properly prepared.
Can I spray Dulux Trade Supermatt?
Yes, Dulux Trade Supermatt can be applied by brush, roller, or spray. If spraying, refer to the manufacturer's recommendations for thinning the paint.
Troubleshooting
Paint is not covering the surface adequately.
Ensure you've applied two coats. If the problem persists, apply a third coat, allowing proper drying time between coats. Make sure the surface is properly prepared.
Paint is showing brush or roller marks.
Ensure you are using the correct application technique. Use a brush or roller designed for emulsion paints. Apply the paint evenly and avoid overworking it. Maintain a wet edge to avoid lap marks.
Colour appears different than expected.
Remember that the colour on your walls may look different than the colour displayed on your monitor, due to monitor settings and lighting conditions. Always test the colour in an inconspicuous area before painting the entire surface.
Paint is peeling or flaking.
Ensure the surface is properly prepared. Remove any loose paint. Prime the surface before applying the paint. Make sure the surface is clean, dry and free of any contaminants.
Pros and Cons
Pros
High opacity for excellent coverage
Easy to apply with a brush, roller, or spray
Suitable for new plaster
Quick drying time
Water-based formula
Trusted brand with a long history
Cons
Colour may appear different than on screen
Requires proper surface preparation for best results
May require more than one coat for optimal coverage, especially on darker surfaces
Best used in temperatures between 10°C and 30°C
Limited to interior use only
The finish can be susceptible to marks and stains in high-traffic areas
Setup, Compatibility & Care
Surface Preparation: Ensure surfaces are sound, clean, and dry before painting. Remove any loose paint, dirt, or grease. Fill any holes or cracks with a suitable filler and sand smooth.
Priming: On new or bare surfaces, seal with a thinned first coat of Dulux Trade Supermatt (up to 1 part clean water to 3 parts paint).
Application: Stir the paint thoroughly before use. Apply two coats of Dulux Trade Supermatt, allowing 2-4 hours drying time between coats. Normal finishing process is 2 coats of thinned Dulux Trade Supermatt (up to 1 part clean water to 5 parts paint).
Tools: Use a brush, roller, or spray. Clean tools with water after use.
Compatibility: Dulux Trade Supermatt is compatible with most common interior surfaces, including plaster, drywall, and previously painted surfaces. However, always test on a small, inconspicuous area first to ensure compatibility.
Care: Once dry, the paint can be gently wiped clean with a damp cloth. Avoid harsh scrubbing, as this may damage the matt finish. For best results when cleaning, test on a small area first.
Storage: Store in a cool, dry place, away from extreme temperatures and frost. Always reseal the tin tightly after use to prevent the paint from drying out.