Schleich Scroll Saw Blades - Silver - 130mm - 10pk - 10tpi

These blades can cut wood, plastic, and non-ferrous metals.

TPI stands for Teeth Per Inch. It refers to the number of teeth on the blade per inch, which affects the blade's cutting performance with different materials.

Replace blades when they become dull, or damaged. The frequency of replacement depends on usage and materials.

These blades are compatible with most standard scroll saws that accept 130mm blades. Always check your saw's manual.

Choose a higher TPI for finer cuts and thinner materials (e.g., plastics) and a lower TPI for thicker materials (e.g., wood).

Store the blades in a dry place to prevent rust. Avoid bending or dropping them.

These blades are not recommended for cutting ferrous metals (e.g., steel).

Reduce feed rate, ensure the blade is correctly tensioned, and select a blade with the appropriate TPI for the material.

Check blade tension, replace a dull blade, ensure the material is properly supported, and use the correct blade for the material.

Refer to your scroll saw's manual for installation instructions. Make sure the blade is aligned correctly.