Liquid Rubber Roof Coating - 1 Litre Grey

It is designed for flat roofs and can be used on a range of other roofing surfaces including asphalt, felt, metal, and concrete.

For optimal adhesion and best results, a primer suitable for your specific roofing surface is recommended. Always test in an inconspicuous area first.

Apply in a single, even coat. Refer to the product's specific coverage rate for guidance on achieving adequate thickness for waterproofing.

The coating should be applied when temperatures are between 10°C and 30°C (50°F and 86°F) and humidity is moderate. Avoid application in direct, harsh sunlight or during rain.

Drying time varies based on temperature and humidity. It is typically touch-dry within a few hours, but full curing can take longer. Avoid exposing it to water until fully cured.

Consult the product documentation for specific recommendations on overcoating or painting compatibility.

Unopened containers stored in a cool, dry place typically have a shelf life of [Insert Shelf Life Here, e.g., 12 months]. Refer to the packaging for exact details.

Tools should be cleaned immediately after use with [Insert Cleaning Solvent Here, e.g., mineral spirits or appropriate solvent] before the coating cures.

Ensure the surface was thoroughly cleaned, dry, and free from dust, oil, or loose material before application. Consider using a compatible primer.

Apply the coating in a consistent direction and thickness. Ensure the product is at the recommended application temperature. Use appropriate tools for a smooth finish.

Check ambient temperature and humidity. Higher humidity or lower temperatures can prolong drying. Ensure adequate ventilation. Avoid applying too thickly.

This can indicate trapped moisture or air. Ensure the surface was completely dry and that the product was applied evenly without trapping air pockets.