E-Tech Engineering Engine Enamel Paint - British Racing Green - 250ml

The E-Tech Engine Enamel is heat rated to 250°C (482°F) due to its ceramic resin formulation.

This particular formulation is designed for brush-on application. For spraying, E-Tech may offer different product lines. Always check the product label for recommended application methods.

Drying times can vary based on temperature and humidity. Typically, it requires a few hours for touch dry and longer for full curing. Refer to the product packaging for specific drying times.

It is ideal for most metal engine parts and components, including engine blocks, valve covers, gear casings, and brackets. Ensure surfaces are clean and dry before application.

Clean brushes and spills immediately after use with a suitable solvent, such as turpentine or white spirit, as recommended for oil-based paints.

Yes, the paint is formulated to resist oil, engine additives, chemicals, and weathering, providing a durable finish against common automotive fluids.

The E-Tech Engine Enamel is available in a range of 16 popular colors.

Ensure the surface was thoroughly cleaned and degreased before application. Surface preparation, such as light abrasion, is crucial for proper adhesion.

Apply paint in thin, even coats using a high-quality brush. Avoid overworking the paint. Consider a second thin coat after the first has dried appropriately.

Ensure application is done in a well-ventilated area at the recommended temperature (typically above 10°C). Humidity or excessively thick coats can impede drying.

Verify the correct color (British Racing Green) was selected. Keep in mind that monitor settings can affect color perception. Ensure the surface color underneath does not significantly alter the final hue.