Diall M6 Hex O-Hook Steel Shield Anchor - Silver

Consult the product specifications for the exact hole diameter required. Using the wrong size hole will compromise the anchor's performance.

No, these anchors are designed for use in concrete and solid masonry only.

No, these anchors are designed for permanent installation and should not be reused once removed.

Load capacity varies based on the base material and installation. Refer to the product specifications for the maximum recommended load for specific conditions.

You will need a drill with the correct sized drill bit, a hammer, and a wrench or socket set to tighten the nut.

Removing these anchors is difficult. The best practice is to cut the bolt at the surface and then attempt to remove the anchor body using a punch.

The zinc plating provides corrosion resistance, protecting the steel anchor from rust and extending its lifespan.

Product specifications are typically found on the product packaging or the manufacturer's website.

Ensure the hole diameter is correct. If the hole is too large, the anchor may not grip properly. Consider using a slightly larger anchor or filling the hole with epoxy resin.

Check the hole depth to ensure it meets the anchor's minimum requirements. Remove the anchor, clear the hole of debris, and reinstall it. If problems continue, inspect the anchor itself for any manufacturing defects.

The load exceeds the anchor's capacity. Reduce the load or replace the anchor with a higher-rated model. Ensure the item is properly balanced to distribute the weight evenly.