Diall M6 Hex Bolt Steel Shield Anchor - (L)70mm, Pack Of 4

Refer to the product packaging or specifications for the correct drill bit size. Using the wrong size will compromise the anchor's performance.

While these anchors are designed primarily for concrete, they may work in solid brick. However, always test a small area first and ensure a secure fit.

These anchors are designed for permanent installation. Removal usually requires breaking or cutting the anchor, which may damage the surrounding material.

No, these anchors are designed for single-use. Once expanded, they should not be reused.

The recommended torque will vary based on the application. Consult the product specifications for the recommended torque for your specific use case.

Load capacity depends on factors like the concrete quality, hole depth, and the specific application. Consult the product specifications for load-bearing information.

The zinc plating provides some corrosion resistance. However, for highly corrosive environments, consider using stainless steel anchors.

Ensure the hole is the correct diameter and depth. Clean the hole to remove any debris. Consider using a different anchor type if the material is too soft or crumbling.

Check if the anchor is properly seated in the hole. Ensure the bolt threads are not damaged. If the anchor is damaged, replace it.

Replace the anchor if the corrosion is severe enough to compromise its strength. Consider using anchors with enhanced corrosion resistance for outdoor applications.