Diall M12 Hex Bolt Steel Shield Anchor - Silver

These Diall M12 Hex Bolt Steel Shield Anchors are designed for permanent and heavy-duty fixings in...

Best current price£6.00from B&Q

One Offer

1 offer from £6.00

View price history by clicking the chart icon.

B&QB&Q - M12 Hex Bolt Steel Shield Anchor (L)90mmPack Of 4
Free delivery in 1–3 days
£6.00
Visit shop

Product Information

Full details

This guide is for anyone needing secure, permanent fixings in concrete and solid materials. The Diall M12 Hex Bolt Steel Shield Anchors offer a reliable solution for heavy-duty applications, ensuring long-term durability. Keep in mind that proper installation and suitability for your specific material are crucial for optimal performance.

All features

ColourSilver
BrandDiall

Extended Product Information

FAQs

What size drill bit do I need?

Refer to the product packaging or the manufacturer's specifications. The drill bit size is critical for proper anchor performance. The size is M12.

Can I use these anchors in hollow materials?

No, these anchors are designed for use in solid materials such as concrete and stone. Using them in hollow materials will result in a weak or failed fixing.

Are these anchors reusable?

No, these anchors are designed for permanent fixings and are not intended to be reused once installed.

What is the maximum load capacity?

The maximum load capacity will depend on the base material and the installation. Always consult the product specifications or manufacturer's data for the load ratings.

What is the thread length?

The thread length is 90mm.

What is the finish of the anchors?

The anchors have a zinc-plated finish for corrosion resistance.

Troubleshooting

Anchor spins during tightening.

Ensure the hole diameter is correct. The hole may be too large. Try using a slightly larger anchor or using a different fixing method.

Anchor fails to grip.

Check the base material. The material might be too soft or unsuitable. Verify the anchor is fully expanded and tightened.

Corrosion observed.

Check for damage to the zinc plating. Replace the anchor if the corrosion is extensive. Ensure the anchor is suitable for the environment.

Pros and Cons

Pros

  • Provides a strong and permanent hold.
  • Resistant to corrosion due to zinc plating.
  • Suitable for demanding structural applications.
  • Easy to install with included components.

Cons

  • Requires drilling into the material.
  • Permanent fixing, not easily removable.
  • May require specific tools for installation.
  • Performance depends on the base material and correct installation.

Setup, Compatibility & Care

  1. Preparation:
  • Identify the location for the anchor.
  • Ensure the base material (e.g., concrete) is suitable and of adequate thickness.
  1. Drilling:
  • Drill a hole using a drill bit of the correct diameter (as specified by the anchor).
  • The hole depth must match the anchor length.
  • Clear the hole of any debris.
  1. Installation:
  • Insert the anchor into the hole.
  • Use a hammer to tap the anchor until it is flush with the surface.
  • Tighten the hex bolt using a wrench or socket.
  1. Compatibility:
  • Designed for use in concrete and other solid materials.
  • Check for compatibility with the specific material and intended load.
  1. Care:
  • Regularly inspect the anchors for any signs of damage or corrosion.
  • Ensure the bolts remain properly tightened.

Similar items

Price History

DatePrice
Visit shop