Best current price£12.09from The Range
Shopping.co.uk recommended and popular offers
The Range£12.09Visit shop Jrp Riveting Products M6 X 21.0 Steel Flat Head Rivet Nuts - Jrprnsfh0680 - Grey
Visit shop43 offers from £12.09 - £77.38
View price history by clicking the chart icon.
The JRP Riveting Products M6 x 14.7 Flat Head Round US Knurled Body Open End Rivet Nuts are engineered for professionals and DIY enthusiasts requiring a secure, reliable fastening solution for industrial and commercial projects. Featuring a robust construction, these rivet nuts provide exceptional strength and a clean, flush finish upon installation. While these nuts offer superior grip due to their knurled body, they are specifically intended for M6 applications, meaning they are not compatible with larger or smaller diameter fasteners.
| Colour | Silver |
|---|---|
| Model Part Number | 1321720 |
| Brand | JRP Riveting Products |
The knurled body provides added friction against the sides of the hole, preventing the fastener from rotating when you tighten a bolt into it.
These are primarily designed for metal applications. Using them in wood may not provide the necessary mechanical grip to prevent the nut from spinning.
While the size depends on the material thickness, typically a 9mm or 9.1mm drill bit is standard for M6 rivet nuts. Consult your tool manual for the specific required hole size.
The product is listed as silver; please check the specific material specifications if you require corrosion resistance for outdoor or marine environments.
Open end means the bottom of the rivet nut is hollow, allowing the bolt to pass through the nut if necessary.
No, you need a dedicated rivet nut installation tool (also known as a nutsert tool) which uses a threaded mandrel to pull the rivet.
The hole may be slightly oversized. Ensure you are using the correct drill bit size and that the knurled body is fully seated.
Check the thread pitch and ensure the nut was not deformed by excessive pressure during the initial setting process.
The material may be too thin for the rivet type. Use a backing plate or consider a rivet nut with a larger grip range.
To install these rivet nuts, you must use a compatible rivet nut setting tool. Ensure the hole is drilled to the precise diameter recommended for M6 inserts to allow for a proper grip. During installation, verify that the material thickness is within the supported range for the 14.7mm length to ensure the rivet collapses correctly. For maintenance, avoid exposure to highly corrosive environments without additional protective coatings, and ensure bolts are not over-torqued, which could strip the internal threads of the nut.
