Cuprinol 5 Year Ducksback Exterior Fence & Shed Treatment Wood Paint - Rich Cedar

For optimal colour depth and the full 5-year protection, two coats are generally recommended, especially on previously untreated or weathered timber. Allow the first coat to dry completely (2-4 hours) before applying the second.

Cuprinol 5 Year Ducksback is primarily formulated for rough-sawn timber like fences and sheds. While it can be applied to planed wood, coverage may differ, and it might not penetrate as effectively. A different Cuprinol product might be better suited for smooth timber.

You can use either a brush or a roller. For large, flat areas like fence panels, a roller can be quicker. For intricate areas, edges, or very rough timber, a brush offers more control and ensures better penetration.

Clean brushes and rollers immediately after use with warm, soapy water. Rinse thoroughly until all product residue is removed.

If it rains before the product has fully dried (typically 2-4 hours, but can vary with conditions), it may wash off or leave streaks. It's best to apply on a dry day with no rain forecast to ensure proper drying and adherence.

Yes, Cuprinol 5 Year Ducksback provides a waterproof barrier, helping to protect your timber from water ingress and moisture damage for up to five years.

Ensure the wood surface was clean and dry before application. Stir the product thoroughly before and during use. Apply a second coat after the first has dried completely, ensuring even distribution.

Check the ambient temperature and humidity. Apply in dry conditions, avoiding extreme cold or high humidity which can prolong drying times. Ensure coats are not applied too thickly.

Apply the product evenly and avoid overloading the brush/roller. Work in the direction of the wood grain. For rough-sawn timber, some texture will remain, but distinct marks can be minimized with careful application.

This often indicates poor surface preparation. Ensure all loose material, dirt, and old flaking finishes were removed and the wood was clean and dry before application. Roughening smooth surfaces slightly can also improve adhesion. > Info needed: [Verify if roughening is recommended for this product type.]