Ft Paints 400Ml Spray Can Floor Paint With Semi Gloss Finish For Garages - Ral 9005-Jet Black
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The FabioT. RT 2K Epoxy Floor Paint is designed for professionals and DIY enthusiasts needing a durable, high-performance coating for industrial floors, workshops, and garages. Its key benefit is superior resistance to heavy mechanical loads and chemical spills, providing a long-lasting, semi-gloss finish. A potential consideration is the 7-day full cure time, requiring patience for complete hardening.
All features
| Colour | Black |
|---|---|
| Model Part Number | FT-EP275-400AER-G-GR |
| Brand | FabioT. |
Extended Product Information
FAQs
What is the primary use case for FabioT. RT 2K Epoxy Floor Paint?
This paint is engineered for industrial floors, workshops, warehouses, and garages that experience heavy mechanical loads and chemical exposure.
How long does it take for the floor to be walkable?
The floor is typically walkable within 24 hours after application.
What is the full cure time for this epoxy paint?
The product requires a full 7 days to cure completely.
Is this product resistant to oil and chemicals?
Yes, it offers resistance to fuels, oils, frost, and de-icing salts.
Can I apply this product myself?
Yes, it can be applied by DIY users using standard application tools like rollers or trowels, but proper surface preparation is essential for best results.
What is the temperature resistance of this paint?
It can withstand heat up to 130°C for short periods.
Can I add anti-slip properties to the finish?
Yes, the paint is compatible with quartz additives to create an anti-slip finish.
What kind of finish does this paint provide?
It provides a semi-gloss, self-levelling finish.
Troubleshooting
Poor adhesion to the concrete surface
Ensure the concrete was properly cleaned, degreased, and completely dry before application. Use a Mipa primer if recommended for the specific substrate.
Uneven or streaky finish
Ensure consistent application technique with the chosen tool (roller, trowel). Work in small sections and maintain a wet edge to avoid lap marks. Ensure the product was mixed thoroughly if applicable.
Soft or tacky surface after 24 hours
This may indicate insufficient mixing of the two components (if it's a two-part system not explicitly mentioned here) or application in temperatures below the recommended range. Allow more time for curing in a well-ventilated area. Ensure correct product mixing ratios are followed.
Bubbles or pinholes in the finish
This can be caused by moisture in the concrete or trapped air. Ensure the concrete is dry and breathable. Apply the coating evenly to avoid trapping air. If moisture is suspected, consider a suitable moisture vapor barrier primer.
Pros and Cons
Pros
- High resistance to mechanical loads and chemicals
- Durable, long-lasting semi-gloss finish
- Quickly walkable in 24 hours
- Good adhesion to concrete surfaces
- Suitable for demanding industrial environments
Cons
- Requires a 7-day full cure time
- Application may require specific tools like rollers or trowels
- Not suitable for extremely high temperatures beyond short bursts of 130°C
Setup, Compatibility & Care
Preparation: Ensure the concrete substrate is clean, dry, and free from any contaminants. Proper surface preparation is critical for optimal adhesion.
Application: Apply using a roller, trowel, or notched trowel. For enhanced grip, consider using quartz additives. The product is compatible with Mipa primers.
Curing: The floor will be walkable within 24 hours. However, allow a full 7 days for the coating to cure completely before exposing it to heavy loads or aggressive chemicals.
Care: Clean spills promptly with a damp cloth. For general cleaning, use mild detergents and water. Avoid abrasive cleaners that could damage the semi-gloss finish.