HydroSure Premium Irrigation Filter - 3/4" BSPF x 3/4" BSPM

A 150 mesh screen has approximately 150 openings per linear inch, indicating a fine level of filtration suitable for trapping small sediment particles.

Cleaning frequency depends on water quality. Inspect monthly; clean as needed, which could be every few weeks to several months.

This filter is designed for irrigation systems and is not certified for potable water.

BSPF refers to Female Parallel Pipe threads, and BSPM refers to Male Parallel Pipe threads, both standard in the UK and many other regions for plumbing and irrigation.

The 150 mesh is effective against fine sediment. It may not stop all algae growth, and larger debris should ideally be filtered out before reaching this point.

The screen is typically an integrated part of the filter assembly and is usually cleaned in place. Replacement usually involves replacing the entire filter unit if the screen is damaged.

Check the filter screen for clogs and clean if necessary. Ensure the filter is installed in the correct direction of water flow.

Ensure BSP threads are properly aligned and tightened. Use appropriate thread sealant tape if necessary.

Ensure no debris is caught in the threads. Use a strap wrench for extra grip if needed, being careful not to damage the housing.