Dulux Heritage Velvet Matt - Linen White

Typically, two coats are recommended for optimal coverage and to achieve the full depth and beauty of the velvet matt finish. On some surfaces or when changing from a very dark to a light color, a third coat may be beneficial.

The paint is usually touch dry in 2-4 hours. Allow approximately 4 hours between coats. Full hardness and durability may take longer, often up to a week.

While primarily formulated for walls, this velvet matt finish can be used on ceilings to create a consistent look throughout the room. However, standard matt ceiling paints are often designed for easier overhead application and better splatter control.

The velvet matt finish is durable. For minor marks, gently wipe with a soft, damp cloth and mild soap. Avoid vigorous scrubbing, as this can 'burnish' or polish the matt surface, creating shiny spots.

Priming is highly recommended for new plaster, bare surfaces, or if you're painting over a very dark or glossy existing color. A good primer ensures better adhesion, an even finish, and true color representation.

For best results, use a good quality synthetic brush for cutting in and a medium-pile roller for larger wall areas. This will help achieve an even finish and minimize roller marks.

Ensure the surface was properly prepared, clean, and primed. Apply an adequate amount of paint evenly, avoiding overspreading. Allow sufficient drying time between coats.

This often indicates insufficient coats or not enough paint per coat. Apply a second or third coat as needed, ensuring generous and even application.

This usually results from poor surface preparation. Ensure walls are clean, dry, and stable before painting. Remove any loose paint, sand, and prime thoroughly.

Use a high-quality brush or roller. Avoid pressing too hard. Ensure paint is stirred well. Apply even strokes and maintain a wet edge to blend sections seamlessly. Do not overwork the paint.