D-C-Fix Self Adhesive Vinyl Wrap - Walnut Block

This pack contains 3 rolls of self-adhesive vinyl wrap, each measuring 67.5cm x 2m. It's a budget-...

Best current price£25.00from Frasers

All Offers

11 offers from £25.00 - £34.49

View price history by clicking the chart icon.

FrasersD C Fix Walnut Block Self Adhesive Vinyl Pack 3 - Brown - 67X2 PACK3
Free delivery in 1–3 days
£25.00
Visit shop
Sports Direct UKGermany Dc Fix Walnut Block Self Adhesive Vinyl Pack 3, Football by D C Fix in Size 67X2 PACK3, Sports Direct
£4.99 delivery
£25.00
Visit shop
StudioD C Fix Walnut Block Self Adhesive Vinyl Pack 3 Brown Size 67X2 Pack3
£4.99 delivery
£25.00
Visit shop
very.co.ukD-C-Fix Walnut Block Self-Adhesive Vinyl Wrap Film - Contains Three 67.5 Cm X 2 M Rolls
£3.99 delivery
£26.00
Visit shop
HomebaseD-C-Fix Walnut Block Sticky Back Plastic Vinyl Wrap Film 67.5Cm X 2M 3 Pack
Free delivery in 1–3 days
£27.00
Visit shop

Product Information

Full details

This guide helps you understand and effectively use the D-C-Fix Self Adhesive Vinyl Wrap - Walnut Block. It's ideal for renters or homeowners looking for a quick, non-permanent way to refresh surfaces. The key benefit is its ease of use and ability to transform spaces with realistic designs. However, ensure surfaces are clean and smooth before application for the best results.

All features

Brandd-c-fix

Extended Product Information

FAQs

How do I remove the vinyl?

Use a hairdryer to warm the vinyl, which will soften the adhesive. Gently peel the vinyl from the surface. Any residue can be cleaned with warm, soapy water.

Can I use this on a textured surface?

No, the vinyl works best on smooth, non-porous surfaces. Textured surfaces will prevent the vinyl from adhering properly.

Is the vinyl waterproof?

It is water-resistant. For areas exposed to water, like around sinks, use silicone sealant for a watertight seal.

What tools do I need?

You'll need a measuring tape, scissors or a craft knife, a smoother, and possibly a hairdryer.

How long does it take for the adhesive to fully bond?

The adhesive takes approximately 24 hours to fully bond.

Can I use this on a hot surface?

It can withstand heat up to 75°C. Avoid placing hot pans directly on the vinyl; always use trivets or worktop savers.

What if I make a mistake during application?

The low-tack adhesive allows for repositioning within the first 24 hours. Gently lift the vinyl and try again. Use a smoother to eliminate bubbles.

Troubleshooting

Air bubbles under the vinyl.

Lift the vinyl and reapply, using a smoother to push out the air. For small bubbles, use a needle to prick them and smooth down.

Vinyl not sticking.

Ensure the surface is clean and dry. Use a hairdryer to activate the adhesive. Press firmly and allow 24 hours for full bonding.

Edges peeling up.

Trim the edges neatly. Apply silicone sealant around the edges, especially in areas exposed to moisture.

Difficult to reposition.

Lightly spray the surface with water before application. Ensure you are within the 24 hour repositioning window.

Pros and Cons

Pros

  • Easy to apply, saving time and effort.
  • Budget-friendly alternative to replacing surfaces.
  • Non-permanent, ideal for renters or those who like to change their decor frequently.
  • Offers a variety of realistic designs to suit different styles.
  • Heat resistant up to 75°C, suitable for everyday use.
  • Allows for repositioning during application for a perfect finish.

Cons

  • Requires a smooth, clean surface for optimal adhesion.
  • Not suitable for direct contact with hot pans (keep 12 inches away).
  • May require extra sealant in areas exposed to water.
  • Edges can be prone to peeling if not applied and sealed correctly.
  • Bubbles may form if not applied carefully (use a smoother).
  • Durability depends on proper care and maintenance.

Setup, Compatibility & Care

  1. Preparation:
  • Clean the surface thoroughly with a household cleaner to remove any dirt, grease, or residue.
  • Ensure the surface is smooth and even. Fill any imperfections with filler and sand down.
  1. Application:
  • Measure the surface and cut the vinyl, using the grid on the backing paper for guidance.
  • Peel off a small section of the backing paper and carefully align the vinyl.
  • Use a dc fix smoother to remove air bubbles as you apply the vinyl.
  • For curved surfaces, use a hairdryer to make the vinyl more pliable.
  1. Compatibility:
  • Suitable for use on most smooth, non-porous surfaces like wood, metal, and glass.
  • Not recommended for rough or textured surfaces.
  1. Care:
  • Clean with regular household cleaners.
  • Wipe up spills immediately to prevent staining.
  • Avoid using abrasive cleaners or scrub brushes.
  • Use worktop savers to protect the vinyl when cutting or placing hot items.

Similar items

Price History

DatePrice
Visit shop