Ronseal Ultimate Protection Decking Stain - Country Oak - 2.5 litre

Coverage varies depending on the wood's porosity and condition, but typically one 2.5 litre tin covers approximately 10-12 square metres per coat.

It is best applied to bare, prepared wood. If applying over an existing finish, test in an inconspicuous area first. For best results, remove old coatings entirely.

Two coats are generally recommended for optimal protection and finish. Allow at least 4 hours between coats.

While it offers excellent protection, it is specifically formulated for decking. For garden furniture, consider a product designed for furniture applications to ensure the best aesthetic and finish.

Ronseal Ultimate Protection Decking Stain is designed to last twice as long as standard decking stains, providing extended durability and protection.

No, this product is formulated for use on natural wood decking only.

Country Oak is a warm, natural brown shade designed to complement the natural beauty of wood.

Ensure the deck was properly prepared, free of dirt and old finishes. Apply evenly, maintaining a wet edge, and avoid stopping mid-board. Stir the product thoroughly before and during application.

Check environmental conditions; ensure temperature is above 10°C and humidity is not excessively high. Ensure adequate ventilation. Allow more drying time if conditions are cool or damp.

The deck surface may not have been adequately cleaned or prepared. Ensure all dirt, grease, and loose material were removed. For existing finishes, ensure they were compatible or fully removed.

Ensure the product was applied as directed. The slip-resistant particles are integrated within the finish and should become apparent as the stain cures. Heavy build-up of dirt or algae can reduce effectiveness; clean the surface regularly.