Best current price£31.55from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£31.55Visit shop Ronseal 39221 Ultimate Protection Decking Stain Sage 2.5 Litre
Visit shop
The Range£40.96Visit shop Ronseal Ultimate Protection Decking Stain Sage 2.5 Litre - 39221 - Durable Weather Protection - Sage
Visit shop24 offers from £31.55 - £72.93
View price history by clicking the chart icon.
This guide is for homeowners and DIY enthusiasts looking to protect and enhance their wooden decking. The Ronseal Ultimate Protection Decking Stain offers superior, long-lasting weather and wear resistance, with added slip resistance for safety. A potential caveat is its longer drying time compared to standard stains, requiring careful planning of application days.
| Colour | Green |
|---|---|
| Model Part Number | 39221 |
| Brand | Ronseal |
This stain is designed to last twice as long as standard decking stains, offering extended protection and aesthetic appeal.
It is best to remove old, flaking finishes completely before applying. For best results, apply to bare, prepared wood or over a compatible Ronseal primer/preserver.
Drying times can vary depending on temperature and humidity. Always refer to the product packaging for specific drying times between coats and before allowing foot traffic.
Two thin coats are generally recommended for optimal protection and a uniform finish. Ensure the first coat is dry before applying the second.
Yes, it is suitable for all types of wooden decking, including hardwoods and softwoods.
Yes, this product includes added slip resistance to help make your deck safer, especially when wet.
This range is available in several colours, including Sage, Charcoal, Rich Mahogany, Willow, Cedar, Medium Oak, and Slate. The specific colour of this product is Sage.
Ensure the stain was thoroughly stirred before and during application. Apply in thin, even coats and avoid over-brushing. Ensure consistent application technique across the entire deck.
Check application conditions. Ensure the temperature is within the recommended range (typically above 10°C) and humidity is not excessively high. Avoid applying too thickly, as this can impede drying.
The surface may not have been adequately prepared. Ensure the deck was clean, dry, and free from contaminants before application. Previous coatings might not have been fully removed or compatible. Sanding the surface before application can improve adhesion.
Colour can vary depending on the type and condition of the wood, as well as the number of coats applied. Test the stain on an inconspicuous area first. Ensure consistency in application and ensure no other stains or finishes are present on the wood.
Preparation: Ensure the decking surface is clean, dry, and free from dirt, grease, and old finishes. Lightly sand any rough areas and sweep thoroughly. For best results on new or bare wood, apply a suitable Ronseal preserver first.
Application: Stir the stain thoroughly before and during use. Apply evenly with a brush or roller, working along the grain of the wood. Two thin coats are recommended for optimal protection and finish. Avoid applying in direct sunlight, during very cold temperatures, or when rain is forecast. Allow adequate drying time between coats as per the product instructions.
Compatibility: This product is suitable for use on all types of wooden decking. It is not recommended for use on furniture or other surfaces not intended for decking.
Care: Clean the applied surface with water and a mild detergent if necessary. Avoid abrasive cleaners or tools that could damage the finish. Regular sweeping will help maintain the appearance and longevity of the stain.
