Polycell Finishing Skim Polyfilla is the easy way to give a beautiful smooth finish to slightly ro...Polycell Finishing Skim Polyfilla is the easy way to give a beautiful smooth finish to slightly rough or uneven plaster. Ready mixed for ease of use, it will skim up to 3mm thick and adheres strongly to plaster. Simply brush it on and smooth off. Keep out of reach of children. Always read instructions. Smooth, flawless walls can be yours with Polycell Finishing Skim Polyfilla. Ideal for slightly uneven or rough plaster, this ready-mixed filler adheres strongly, covering imperfections up to 3mm thick. Its simple brush-on application ensures an easy, professional finish. Remember to keep out of reach of children and always read the instructions before use. Gives a smooth finish to slightly rough or uneven plaster Simply brush it on and smooth off Skims up to 3mm thick with strong adhesion Drying time Surface dry in 3 - 4 hours (depending on conditions), Weight: 4.40924524 pounds, Manufacturer: ICI Paints Akzo Nobel
This guide is for anyone looking to achieve a smooth, professional finish on slightly rough or uneven plaster surfaces. Polycell Finishing Skim Polyfilla provides an easy-to-use, ready-mixed solution that adheres strongly to plaster, covering imperfections up to 3mm thick. While it's simple to apply, proper surface preparation is key for optimal results.
All features
Colour
Grey
Model Part Number
5084988
Brand
Polycell
Extended Product Information
FAQs
How much surface can I cover with one container?
Coverage depends on the thickness of the application. The product is 2L in volume.
Can I use this product outdoors?
No, Polycell Finishing Skim is designed for indoor use only.
How long does it take for the filler to dry?
Surface dry in 3-4 hours, depending on conditions. Allow at least 24 hours before priming.
What tools do I need?
You'll need a paintbrush, the included smoothing tool, and potentially a damp cloth for the final smoothing.
Can I paint directly over the filler?
No, prime the surface before painting.
How should I store the product?
Do not store in extremes of temperature and protect from frost. Replace the lid to prevent drying out.
What is the shelf life of the product?
Ensure the product is stored correctly, and the lid is sealed. If stored properly, the product should remain usable for a reasonable amount of time.
Troubleshooting
Filler is not adhering properly.
Ensure the surface is clean, dry, and free of loose particles. Consider using a primer.
Uneven finish after application.
Ensure you are using the smoothing tool correctly, maintaining firm and even pressure. Re-wet the surface if necessary during the smoothing process.
Filler is cracking after drying.
Apply in thin coats, especially when filling deeper imperfections. Allow each coat to dry completely before applying the next.
Pros and Cons
Pros
Easy to apply, even for beginners.
Provides a smooth, professional-looking finish.
Ready-mixed formula saves time and effort.
Strong adhesion ensures long-lasting results.
Covers minor imperfections effectively.
Cons
Requires proper surface preparation for optimal results.
Drying time can vary depending on environmental conditions.
Only suitable for indoor use.
Limited to skimming imperfections up to 3mm.
Setup, Compatibility & Care
Setup
Surface Preparation: Ensure the surface is dry and free of loose material. Touch in nails and screw heads with a suitable metal primer.
Stirring: Stir the Polyfilla to a creamy consistency.
Application: Spread on with a paintbrush using random strokes.
Smoothing: Smooth over using the enclosed spreader moving in an upward curve. Maintain a firm, even pressure.
Drying: Allow to dry for 2-3 hours until the surface is firm but before it dries hard.
Final Smoothing: Use the spreader to achieve a flat, smooth finish, re-wetting the surface if necessary. After 3 to 4 hours, re-wet and rub gently with a damp cloth.
Priming: Prime before painting. Size before papering.
Compatibility
Suitable Surfaces: Plaster, plasterboard, and masonry.
Not Suitable: For outdoor use.
Care
Replace the lid on the container to prevent the product from drying out during storage.
Remove excess product from tools before cleaning in warm water.