Polaroid Originals B&W 600 is a classic instant film for the Polaroid 600 instant camera series, a...Polaroid Originals B&W 600 is a classic instant film for the Polaroid 600 instant camera series, also compatible with i-Type cameras like the Impossible i-Type and Polaroid OneStep2. This film captures images in deep blacks, bright whites, and all shades in between, perfect for any occasion from studio portraits to parties. Each pack yields eight instant black and white photos with the iconic white border. With a light sensitivity of ASA 640, this film thrives in natural light. For optimal results, use the flash for both indoor and outdoor shots to maximize light capture. Photos develop in 5-10 minutes. Initially blank, the photos are sensitive to light during development; shield them from light and place them face down. Store the film chilled, but not frozen, and ensure it's at room temperature when shooting. Cold weather requires keeping photos warm near your body, while hot weather necessitates keeping them cool. This Black & White 600 film is the original format for vintage Polaroid 600 cameras and newer models such as the One Step+, Polaroid Now, and Polaroid Lab. Clean rollers inside the film door with a soft, damp cloth for clearer photographs.
This guide is for anyone using Polaroid 600 cameras or compatible i-Type cameras looking to capture classic black and white instant photos. The film produces high-contrast images with distinctive analog texture, offering a nostalgic aesthetic. However, be aware that film is light-sensitive during development, so protect it from direct sunlight after it is ejected from the camera.
All features
Brand
Polaroid
Extended Product Information
FAQs
How long does it take for the photos to develop?
Images start to appear within a minute, and full development takes 5-10 minutes.
Can I use this film in any Polaroid camera?
This film is compatible with Polaroid 600 cameras and i-Type cameras.
How should I store the film?
Store the film in a refrigerator but not in the freezer. Allow it to reach room temperature before use.
What should I do after taking a photo?
Shield the photo from direct light and place it face down during development.
What if my photos are too dark?
Make sure you're using the flash, especially indoors or in low-light conditions. Experiment with different lighting to see what works best.
How many photos are in each pack?
Each pack contains 8 instant photos.
Can I reuse the film cartridge?
No, Polaroid film cartridges are single-use.
How do I clean the camera rollers?
Use a soft, damp cloth to gently wipe the rollers inside the film door.
Troubleshooting
Photos are blank or underdeveloped.
Ensure the film is not expired. Check the camera's battery. Shield photos from light during development, and make sure to give them the full 5-10 minutes to develop.
Images are blurry or have streaks.
Clean the camera's rollers with a soft, damp cloth. Ensure the lens is clean.
Camera is not ejecting the photo.
Check that the film pack is correctly loaded. Make sure the camera has power.
Pros and Cons
Pros
Captures images with a classic black and white aesthetic.
Easy to use with a wide range of Polaroid cameras.
Quick development time allows for immediate enjoyment of photos.
The iconic white border adds to the nostalgic feel.
Cons
Photos are light-sensitive during development and need to be shielded.
Limited number of photos per pack (8).
Film can be affected by extreme temperatures.
Film cost is relatively high compared to digital photography.
Setup, Compatibility & Care
Camera Compatibility: This film is designed for Polaroid 600 cameras and i-Type cameras like the Polaroid OneStep2, and Polaroid Now.
Loading the Film: Open the film door of your Polaroid camera and insert the film pack, ensuring the dark slide faces up. Close the door.
Taking Photos: Point and shoot. The camera will automatically eject the photo.
Protecting the Image: Shield the photo from direct light immediately after it is ejected. Place it face-down for the first few minutes.
Storage: Store film packs in a refrigerator (but not the freezer) before use. Allow the film to reach room temperature before loading it into your camera. If shooting in cold weather, keep the photos warm; in hot weather, keep them cool.
Cleaning: Clean the rollers inside the film door with a soft, damp cloth if you notice any issues with the images.