Ronseal One Coat Everywhere Paint - Linen Matt - 5L

This versatile paint is suitable for most interior surfaces including walls, ceilings, interior wood (such as skirting boards and doors), and metal (like radiators). It delivers a rich colour and tough matt finish.

Yes, it is designed to provide excellent coverage and rich colour in just one coat for most applications. However, on very porous, dark, or uneven surfaces, a second coat or prior priming might enhance the final finish and colour depth.

The paint offers a stain-resistant and washable finish. For best results, allow the paint to fully dry and cure (usually 7-14 days) before cleaning. Wipe gently with a damp cloth and mild, non-abrasive detergent.

Info needed: Please refer to the product label for specific coverage rates, as this can vary depending on the surface porosity, texture, and application method.

This paint provides a contemporary matt finish, which helps to hide minor surface imperfections and offers a sophisticated, non-reflective look.

While designed for one-coat application, priming is always recommended for new, bare, or highly porous surfaces (like new plaster or untreated wood) to ensure optimal adhesion, coverage, and a smooth, even finish. For previously painted surfaces in good condition, priming may not be necessary.

The paint is typically touch dry within 1-2 hours. If a second coat is desired or needed, you should wait approximately 4 hours before recoating. Allow several days (up to 7-14) for the paint to fully harden and cure before heavy use or cleaning.

Ensure the surface is clean, dry, and free from loose material. For porous or significantly darker surfaces, a primer or two thinner coats may be necessary to achieve optimal coverage and colour depth. Apply evenly without stretching the paint too thin.

Apply paint evenly using a good quality roller or brush. Avoid overloading your tool and maintain consistent pressure and smooth strokes. Overlap slightly on each pass to ensure a seamless finish. Allow adequate drying time between coats if applying more than one.

Allow the paint to fully cure (typically 7-14 days) before aggressive cleaning, as the finish hardens over time. For fresh stains, gently wipe with a damp cloth and mild detergent. Avoid abrasive cleaners or excessive scrubbing on newly painted surfaces.

This often indicates poor surface preparation. Ensure surfaces are thoroughly clean, dry, sound, and properly prepared (e.g., sanded, filled, primed) before painting. Loose or flaky old paint must be removed entirely.